Abstract:The ultimate strength of a structural component can be limited in the presence of microscopic imperfections, which serve as the origin of damage process. These micro imperfections are considerably shorter than the acoustic wavelength of the frequencies normally used in ultrasonic nondestructive technique. As a result, the sensitivity of the linear acoustic characteristics (attenuation, velocity etc.) is not sufficient enough to detect the microscopic imperfections of a structure. But, these micro imperfections produce local excess nonlinearity, which is higher than the intrinsic nonlinearity of the intact structure. On the other hand, weakly or incompletely bonded interfaces (e.g., contact-type defects, cracks, debondings, delaminations and loosening in bolted joints) also exhibit highly nonlinear behavior as the contact area changes frequently when elastic waves propagate through the interface. The various nonlinear techniques for damage detection developed in the recent years are: non-linear resonant ultrasound spectroscopy (NRUS) and non-linear wave modulation spectroscopy (NWMS).The later consists of two methods, namely harmonics generation and sidebands generation. In this work a simulation study has been carried out using ANSYS Finite Element (FE) software, where the NWMS methodology is adopted for the case of a stiffened aluminum plate for different degrees of damage in the form of different delamination lengths. A damage index (DI) is defined by taking into account the relative amplitude of the harmonics or the side-bands with respect to the carrier frequency amplitude. It is found that the DI increases with the increase in delamination length.

Characterization of Surface Damage of a Solid Plate under Tensile Loading Using Nonlinear Rayleigh Waves

Evolving Fatigue Damage Detection Based on Multi-Component Nonlinear Modulation Mechanism of Tuned Laser-Generated Rayleigh Waves

Evaluation of plastic damage for metallic materials under tensile load using nonlinear longitudinal waves

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Acoustoelastic determination of local surface stresses in polymethylmethacrylate

Health Monitoring of Stiffened Metallic Plates Using Nonlinear Wave Interaction and Embedded PZT Transducers

Characterization of Damage Size in Metallic Plates Using Lamb Waves

Study on the Interaction Mechanism of Laser-Generated Rayleigh Waves and Subsurface Inclined Cracks

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Ultrasonic Nonlinear Responses of a Closed Crack in Plate-like Structure

Nonlinear Guided Wave Tomography for Detection and Evaluation of Early-Life Material Degradation in Plates

Peridynamic modeling of nonlinear surface acoustic waves propagating in orthotropic materials

Fatigue damage assessment using nonlinear critically refracted longitudinal (L CR ) wave in pure iron: Experiments and FEM

Assessment of Material Dislocation Damage by Nonlinear Ultrasound

Characterizing damage patterns and evolution in Multi-Hole GLARE laminates under tensile load via integrated AE and DIC techniques

Modeling, identification and optimization of damage deterioration in the bolted repaired metallic plate

Evaluation of Material Integrity Using Higher-Order Harmonic Generation in Propagating Shear Horizontal Ultrasonic Waves

Nonlinear ultrasonic detection of partially closed cracks in metal plates using static component of lamb waves

Nonlinear Ultrasonic Testing of Fatigue Crack for Metal Component

Baseline-free damage visualization using noncontact laser nonlinear ultrasonics and state space geometrical changes

Surface Crack Monitoring by Rayleigh Waves with a Piezoelectric-Polymer-Film Ultrasonic Transducer Array