Simulation and Experimental Study on the Characteristics of Metal and Dielectric Spheres in a Pulsed Dielectric Barrier Discharge
Yonggang Wang,HanLin Yao,Wei Wang,LiuXia Li,Song Jing,Zi Li
DOI: https://doi.org/10.1109/tps.2024.3360519
IF: 1.368
2024-01-01
IEEE Transactions on Plasma Science
Abstract:In this article, a 2-D fluid simulation model of a coaxial cylindrical DBD reactor filled with single solid spheres of two different materials is developed for plasma-assisted milling discharge studies. In this article, the evolution, quenching process, and comparison of the discharge characteristics, including its current, electron density distribution, and electric field distribution, of stainless steel and SiO $_{2}$ spheres discharged at atmospheric pressure DBD were investigated separately, and the discharge images were captured by using an ICCD camera to further validate the results predicted by experimentally established models. The following conclusions were obtained from the study. First, in terms of current, the initial discharge moment of SiO $_{2}$ spheres is slightly later than that of stainless steel-filled spheres. During the rising edge of pulse voltage, there was only one DBD current peak in stainless steel-filled spheres, while there were two current peaks in SiO $_{2}$ -filled spheres, and the first current peak was smaller than the second, indicating that the second discharge was stronger than the first. Second, electron density distribution and ICCD images show that the discharge is mainly concentrated in the volume discharge at the top of the spheres when stainless steel-filled spheres are present. Comparatively, SiO $_{2}$ spheres first experience a period of volume discharge, followed by a more diffuse discharge around the spheres, especially in the entire region between the top of the spheres and the dielectric layer. Overall, the SiO $_{2}$ spheres show a more intense discharge compared to the stainless steel spheres.
physics, fluids & plasmas