Abstract:The chemical characteristics of atmospheric pressure dielectric barrier discharge plasma generated in air are very sensitive to some factors, such as environment temperature and discharge power. There are two typical modes, namely the ozone mode and nitrogen oxides mode. In this paper, the air surface micro-discharge plasma in the ozone mode and nitrogen oxides mode are respectively generated at environment temperatures of 5 °C and 50 °C when discharge power is almost kept at 6 W, and the plasma-activated water (PAW) is prepared by means of passing the plasma exhaust gases into deionized water. By comparing the reactive species in PAW under these two modes and their sterilization effects, it is found that the concentrations of H+, H2O2, NO2 −, NO3 − and ONOO− in PAW for the nitrogen oxides mode are about 2–3 fold over those for the ozone mode, while the concentration of O3 in PAW for the ozone mode is more than 28 times that in the nitrogen oxides mode. The sterilization effect under the nitrogen oxides mode is two orders of magnitude higher than that in the ozone mode. For the biological effects, it is found that treatment of a methicillin-resistant Staphylococcus aureus suspension by PAW leads to approximately a four-log reduction in the nitrogen oxides mode, which is higher than that in the ozone mode, leading to speculations that the reactive nitrogen species represented by ONOO− in PAW may be the critical species in sterilization. Furthermore, the transition between ozone mode and nitrogen oxides mode can be achieved by adjusting the discharge power. Interestingly, both of the compositions and concentrations of the reactive species in gas and liquid phases under 5 °C & 9.5 W and 50 °C & 6 W conditions are roughly identical, indicating that the effect of environment temperature on the mode transition is consistent with that of discharge power.

Influence of Related Factors on 03 Generating Characteristics in Airowater-soild Mixture Plasma Reactor

Generation of Large-volume Plasma Under Low Air-pressure and Study of Its Electrical Characteristics

Analysis and Prospect on Key Technology of High-voltage Discharge for Environmental Engineering Study and Application

Formation of Active Species by Bipolar Pulsed Discharge in Water

The Influence Of Water Characteristics On Plasma-Containing Bubble Dynamics

Temporal development and chemical efficiency of positive streamers in a large scale wire-plate reactor as a function of voltage waveform parameters

Characteristics of the Bipolar Pulsed Discharge in the Water-Air-Solid Particle Mixture

Chemistry of Air, N2, and O2 Reverse Vortex Gliding Arc Plasma System

Formation of Hydrogen Peroxide by Bipolar Pulsed Discharge Plasma in Water

An Integrated Approach to Understanding the Mass Transfer and Reaction Processes in a Pulsed High-Voltage Discharge Reactor

Bipolar Pulsed Discharge in the Gas-liquid-solid Mixture and Its Application for Water Treatment

Influence of Electrical Parameters on H2o2 Generation in Dbd Non-Thermal Reactor with Water Mist

Spectroscopic Investigation of the Bipolar Pulsed Discharge in Water-Air Mixture

Enhancement of Active Species Formation by Catalysis in the Bipolar Pulsed Discharge Plasma System

Study of ozone generation in an atmospheric dielectric barrier discharge reactor

Experimental Study of Packed-bed Dielectric Barrier Discharge Applied on Ozone Reactor

Global Model of Plasma-Activated Water over Long Time Scale: Pulsed Discharge and Afterglow

Mode Transition of Air Surface Micro-Discharge and Its Effect on the Water Activation and Antibacterial Activity

EFFECT OF OXYGEN AND WATER VAPOR ON THE CHARACTER OF GLIDING ARC GAS DISCHARGE

Removal Factor Analysis of Chemical Oxygen Demand by Bipolar Pulsed Discharge in Dye Waste Water with Plasma Treatment

Post-Discharge Evolution Of Reactive Species In The Water Activated By A Surface Air Plasma: A Modeling Study