Abstract:An in situ synthesis method for carbon-coated LiFePO4 powders has been investigated in detail using inexpensive FePO4 as an iron source and polypropylene as a reductive agent and carbon source. Thermogravimetric and differential thermal analysis of the precursor mixture indicated that the pyrolysis of polypropylene and the combination reaction of LiFePO4 could be processed synchronously at a synthesis temperature between 500 and 800 degrees C. X-ray diffraction analyses and scanning electron microscopy observations showed that LiFePO4/C composites with fine particle sizes and homogeneous carbon coating could be directly synthesized by the in situ method. The electrochemical performances of the carbon-coated LiFePO4 powder synthesized at 700 degrees C were evaluated using an electrochemical model cell by galvanostatic charge/discharge and cyclic voltammetry measurements. The in situ synthesized LiFePO4/C composite had a high electrochemical capacity of 164 mA h g(-1) at the 0.1C rate, and possessed a favorable capacity cycling maintenance at the 0.3 and 0.5C rates. The good electrochemical properties of the LiFePO4/C composite are suggested to originate from the good crystallinity, the fine particle sizes, and the efficient electronic conductive coating layer of the material. (c) 2005 The Electrochemical Society.

Synthetic Lifepo4/C Without Using Inert Gas

In Situ Synthesis and Properties of Carbon-Coated Lifepo4 As Li-Ion Battery Cathodes

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

Synthesis of LiFePO 4 -C Cathode Materials Using a Green and Low-Cost Method

Synthesis and Characterization of Lifepo4/C Prepared Via A Sol-Gel Method

LiFePO<sub>4</sub>/C Cathode Materials Prepared by One-Step Fast Carbothermal Method Using Fe<sub>2</sub>O<sub>3</sub> as Raw Materials

LiFePO4 prepared by carbothermal reduction method

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Synthesis of LiFePO4/C composite electrode with enhanced electrochemical performance

A simple, cheap soft synthesis routine for LiFePO4 using iron(III) raw material

Synthesis of LiFePO 4 /C Composite Electrode with Enhanced Electrochemical Performance

Inorganic-based Sol–gel Synthesis of Nano-Structured LiFePO 4 /C Composite Materials for Lithium Ion Batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Synthesis and Properties of Lifepo4/C Cathode Material with A New Carbon Source

Synthesis and Characterization of LiFePO4 by a New Synthetic Route

Ultrafast Fabrication of LiFePO 4 with High Capacity and Superior Rate Cycling Performance for Lithium Ion Batteries

Bio-Synthesis Of Lifepo4/C Composites For Lithium Ion Battery

LiFePO4 cathode power with high energy density synthesized by water quenching treatment

Extra Li-ion storage of LiFePO4/C composite materials synthesized with Fe1.5P

Synthesis, characterization, and electrochemical performance of LiFePO4/C cathode materials for lithium ion batteries using various carbon sources: best results by using polystyrene nano-spheres

Controllable Synthesis of Regular Lifepo4 Particles Via Solvothermal Reaction