Abstract:The current research about the flow ripple of axial piston pump mainly focuses on the effect of the structure of parts on the flow ripple. Therein, the structure of parts are usually designed and optimized at rated working conditions. However, the pump usually has to work in large-scale and time-variant working conditions. Therefore, the flow ripple characteristics of pump and analysis for its test accuracy with respect to variant steady-state conditions and transient conditions in a wide range of operating parameters are focused in this paper. First, a simulation model has been constructed, which takes the kinematics of oil film within friction pairs into account for higher accuracy. Afterwards, a test bed which adopts Secondary Source Method is built to verify the model. The simulation and tests results show that the angular position of the piston, corresponding to the position where the peak flow ripple is produced, varies with the different pressure. The pulsating amplitude and pulsation rate of flow ripple increase with the rise of pressure and the variation rate of pressure. For the pump working at a constant speed, the flow pulsation rate decreases dramatically with the increasing speed when the speed is less than 27.78% of the maximum speed, subsequently presents a small decrease tendency with the speed further increasing. With the rise of the variation rate of speed, the pulsating amplitude and pulsation rate of flow ripple increase. As the swash plate angle augments, the pulsating amplitude of flow ripple increases, nevertheless the flow pulsation rate decreases. In contrast with the effect of the variation of pressure, the test accuracy of flow ripple is more sensitive to the variation of speed. It makes the test accuracy above 96.20% available for the pulsating amplitude of pressure deviating within a range of ±6% from the mean pressure. However, with a variation of speed deviating within a range of ±2% from the mean speed, the attainable test accuracy of flow ripple is above 93.07%. The model constructed in this research proposes a method to determine the flow ripple characteristics of pump and its attainable test accuracy under the large-scale and time-variant working conditions. Meanwhile, a discussion about the variation of flow ripple and its obtainable test accuracy with the conditions of the pump working in wide operating ranges is given as well.

A Ripple Estimation Method for Piecewise Averaged Model of PWM Converters

Modeling and Analysis of PWM Converters with a New GSSA Method

Piecewise Average-Value Model of PWM Converters with Applications to Large-Signal Transient Simulations

Wind Power System State Estimation with Automatic Differentiation Technique

Fast electromagnetic transient simulation method for PWM converters based on averaging theory. Part one: Establishment of piecewise averaged model for PWM converters

Stochastic Averaging Method for Quasi Hamiltonian System of Multi-Machine Power Systems

Fast Electromagnetic Transient Simulation Method for PWM Converters Based on Averaging Theory Part Two Improved EMTP Algorithm Suitable for Piecewise Averaged Model of PWM Converters

Modeling and Analysis of Three-Phase Inverter Based on Generalized State Space Averaging Method

The Research of Three Phase Voltage PWM Rectifier Based on Variable-Structure Control

A Compensation Method for Averaged Models of PWM Converters in Large-Time-Step Simulations

A Modified Digital Power Calculating Method Based on Sliding Averaging and Phase Shifting of Voltage and Current

Improved Small-Signal Model for Switching Converter With Ripple-Based Control

Comverter averaged model based on amplitude distribution function and its applications

Integrating an Improved Averaged Model for Pwm Converters into Emtp

Generalized Averaging Method for Power Electronics Modeling from DC to above Half the Switching Frequency

Prediction and Analysis of PWM-Induced Current Ripple of PMSM at Low Switching-to-Fundamental Frequency Ratios

A fast transient simulation model of DFIG based on the piecewise averaging method

Theoretical and Simulation Investigations on Flow Ripple Reduction of Axial Piston Pumps Using Nonuniform Distribution of Pistons

Transient analysis of PWM inverter-fed AC motor drives using finite element method coupling with external circuit model

Impact of Typical Steady-State Conditions and Transient Conditions on Flow Ripple and Its Test Accuracy for Axial Piston Pump

Current Ripple Reduction for the Quasi-Z-Source Inverter with Modified Space-Vector PWM Strategy