Abstract:According to the third-order simplified dynamic model of doubly-fed induction generator(DFIG),an equivalent method of DFIG wind farm based on the Thevenin circuit(EMBTC)is proposed.Firstly,based on the characteristics of mechanical power and rotor speed curve of wind turbine,a faster power flow calculation of power system with wind farm is carried on to determine the initial states of DFIGs.Then,off-line calculation is made to find the upper and down limits of injected wind speed when dynamical characteristics of transient electromotive force change evidently.The DFIGs in the wind farm are clustered according to the dynamic similarities.Secondly,the transient electromotive force buses of DFIGs in one group are aggregated to an equivalent bus through ideal transformers with complex ratios.Parameters of the equivalent DFIG are identified with a similar method of synchronous generators.According to the energy conservation law and a presumed mechanical power and rotor speed characteristics of the equivalent DFIG,the equivalent wind speed and the rotor speed are obtained.Finally,network reduction is accomplished by the elimination of phase shifting transformers,which determines the electrical connections between equivalent DFIG and the point of common coupling.Simulation results of an example wind farm with six DFIGs show that one-DFIG equivalent model has a high steady accuracy while the dynamical accuracy is relatively low.The dynamic precision can be effectively improved when three-DFIG equivalent model are utilized.The EMBTC is suitable for wind farms with complex connections and various wind speeds.

A fast transient simulation model of DFIG based on the piecewise averaging method

A Dynamic Equivalent Method for Doubly-fed Induction Generator Wind Farm Based on the Thevenin Equivalent Circuit

Phase–amplitude Model for Doubly Fed Induction Generators

Impedance Modeling and Analysis for DFIG-Based Wind Farm in SSO Studies

Integrated Model of DFIG and SFR for Frequency Regulation Control Research of Wind Turbine Generator

Simplified Modeling of Dfig with Pwm Nonlinear Characteristics for Fast Transient Simulation

A Fast Transient Simulation Model of the DFIG Based on the Switching-Function Model of the VSC

Averaged Modeling and Fast Electromagnetic Transient Simulation for Doubly-fed Wind Turbines

Fast electromagnetic transient simulation method for PWM converters based on averaging theory. Part one: Establishment of piecewise averaged model for PWM converters

Fast Electromagnetic Transient Simulation Method for PWM Converters Based on Averaging Theory Part Two Improved EMTP Algorithm Suitable for Piecewise Averaged Model of PWM Converters

Rapid Modeling and Simulation Method for Inverter-interfaced Distributed Generators

Modeling and Control of a Wind-Turbine-driven DFIG Incorporating Core Saturation During Grid Voltage Dips

Transient Characteristic Modeling of DFIG Considering Control Loop under Grid Voltage Fault

Transient Behavior Analysis of Low Voltage Ride Through Ability of the DFIG with Different Numbers of Turns in Rotor Windings

A Modeling Method for the Control Circuit of a Double-Fed Induction Generator in a Wind Power System Based on Multimodel Fusion

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

Three-Phase Steady-State Model of Doubly Fed Induction Generator Considering Various Rotor Speeds.

An Identification Method for Sequence Impedance Model of DFIG Based on the Joint of Knowledge Driving and Data Driving

Multi time-scale dynamic models for doubly-fed induction generator in DIgSILENT

A Coupled 3D FEM-Distribute Circuit Model for Numerical Analysis of Small Time Scale Transients of an IGBT based Inverter

Modeling and Analysis of DC-Link Dynamics in DFIG System with an Indicator Function