Abstract:According to the third-order simplified dynamic model of doubly-fed induction generator(DFIG),an equivalent method of DFIG wind farm based on the Thevenin circuit(EMBTC)is proposed.Firstly,based on the characteristics of mechanical power and rotor speed curve of wind turbine,a faster power flow calculation of power system with wind farm is carried on to determine the initial states of DFIGs.Then,off-line calculation is made to find the upper and down limits of injected wind speed when dynamical characteristics of transient electromotive force change evidently.The DFIGs in the wind farm are clustered according to the dynamic similarities.Secondly,the transient electromotive force buses of DFIGs in one group are aggregated to an equivalent bus through ideal transformers with complex ratios.Parameters of the equivalent DFIG are identified with a similar method of synchronous generators.According to the energy conservation law and a presumed mechanical power and rotor speed characteristics of the equivalent DFIG,the equivalent wind speed and the rotor speed are obtained.Finally,network reduction is accomplished by the elimination of phase shifting transformers,which determines the electrical connections between equivalent DFIG and the point of common coupling.Simulation results of an example wind farm with six DFIGs show that one-DFIG equivalent model has a high steady accuracy while the dynamical accuracy is relatively low.The dynamic precision can be effectively improved when three-DFIG equivalent model are utilized.The EMBTC is suitable for wind farms with complex connections and various wind speeds.

Averaged Modeling and Fast Electromagnetic Transient Simulation for Doubly-fed Wind Turbines

A Dynamic Equivalent Method for Doubly-fed Induction Generator Wind Farm Based on the Thevenin Equivalent Circuit

Transfer Function Based Equivalent Modeling Method for Wind Farm

Integrated Model of DFIG and SFR for Frequency Regulation Control Research of Wind Turbine Generator

Modeling and Control of Wind Turbine with Doubly Fed Induction Generator

Modeling Principle and Parameter Identification of Double Fed Wind Turbine for Electromechanical Transient Simulation of Power System

A fast transient simulation model of DFIG based on the piecewise averaging method

Dynamic Modeling and Simulation of Doubly-Fed VSCF Wind Generator Based on PSCAD/EMTDC

Fast Electromagnetic Transient Simulation Method for PWM Converters Based on Averaging Theory Part Two Improved EMTP Algorithm Suitable for Piecewise Averaged Model of PWM Converters

A Fast Transient Simulation Model of the DFIG Based on the Switching-Function Model of the VSC

A Modeling Method for the Control Circuit of a Double-Fed Induction Generator in a Wind Power System Based on Multimodel Fusion

Simplified Modeling of Dfig with Pwm Nonlinear Characteristics for Fast Transient Simulation

A Dynamic Equivalent Aggregation Method of Wind Turbine Systems with a Full‐scale Power Converter for Electromagnetic Transient Simulations

Electromagnetic Transient Modeling and Simulation of Doubly Fed Induction Generators for Wind Turbines Based on Vector Control

Fast electromagnetic transient simulation method for PWM converters based on averaging theory. Part one: Establishment of piecewise averaged model for PWM converters

Modeling and Dynamic Simulation of 2 MW Doubly-fed Induction Generator Wind Power System

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

Multi-Scale Modeling and Simulation of DFIG-Based Wind Energy Conversion System

Rapid Modeling and Simulation Method for Inverter-interfaced Distributed Generators

Integrated Equivalent Model of Permanent Magnet Synchronous Generator Based Wind Turbine for Large-scale Offshore Wind Farm Simulation

Modeling and Real-Time Simulation of a Doubly-Fed Induction Generator Driven by a Wind Turbine