Abstract:Two nanocrystalline two-phase Cu-Ni-Cr alloys, both prepared by mechanical alloying and containing about 20 at.% Cr but with different Ni contents (40 and 20 wt.%, respectively), have been oxidized in 1 atm O-2 at 700-800 degreesC. Their oxidation behavior has been compared with that of two cast alloys of the same composition, already studied previously, to examine the effects of a large reduction of the size of the individual phase grains and particles. The nanophase alloy with 40 wt.% Ni formed a flat external layer of chromia of regular thickness, while the corresponding cast alloy produced a very irregular chromia layer, often protruding deeply into the alloy, only after an initial stage of rather fast corrosion involving also copper and nickel, associated with some degree of internal oxidation. By oxidation at 700 degreesC the nanophase alloy with 20 wt.% Ni formed an irregular chromia layer associated with low corrosion rates. The corresponding cast alloy formed complex scales containing Cu, Ni and Cr oxides, extending into the alloy in the form of large pegs, even though a very irregular and discontinuous innermost chromia layer was still able to produce low corrosion rates. On the contrary, at 800 degreesC both alloys formed complex scales containing mixtures of the oxides of the three metal components. However, the scales grown on the cast alloy were much more irregular in thickness and formed large protrusions into the alloy. In spite of this, the corrosion kinetics of the nanophase 20 wt.% Ni alloy at 800 degreesC were more irregular and, except for an initial stage, less protective than that of the cast alloy with the same composition. (C) 2002 Published by Elsevier Science Ltd.

The Oxidation of Nanocrystalline Ni3al Fabricated by Mechanical Alloying and Spark Plasma Sintering

Oxidation of Li-doped Ni3Al

The Oxidation Resistance of Submicron-Grained NiAl–Al2O3 Composite Fabricated by Pulse Current Auxiliary Sintering

Oxidation Behavior and Mechanism of a Ni-based Single Crystal Superalloy with Single Α-Al2o3 Film at 1000 °C

Effect of Nickel Aluminide Microcrystalline Coating on High-Temperature Oxidation Behavior of NiAl-33.5%Cr-0.5%Zr Alloy

Oxidation behavior at 1000 circle C for nanocrystalline Ni-20Cr-0.6Al alloy deposited by EB-PVD

Isothermal Oxidation Resistance of As-cast NiAl and NiAl-(Cr, Mo) Eutectic Alloys at 1000°C

Exploring the Influence of Nanocrystalline Structure and Aluminum Content on High-Temperature Oxidation Behavior of Fe-Cr-Al Alloys

Cyclic Oxidation Behavior of Ni3Al-based Single Crystal Alloy IC21

Cyclic Oxidation of Sputter-Deposited Nanocrystalline Fe-Cr-Ni-Al Alloy Coatings

Oxidation Behavior of Cast Ni3Al Alloys and Microcrystalline Ni3Al+5% Cr Coatings with and without Y Doping

Oxidation Kinetics of Microcrystalline Ni–11.5Cr–4.5Co–0.5Al Superalloy Sheet Fabricated by Electron Beam Physical Vapor Deposition at 900 °C

Oxidation Behavior of Porous Nial Prepared Through Reactive Synthesis

Grain Size Effects on the Oxidation of Two Ternary Cu–Ni–20wt.% Cr Alloys at 700–800 °C in 1 Atm O2

Oxidation resistance at 900 °C of porous Ni-Al-Cr intermetallics synthesized via rapid thermal explosion reaction

Oxidation Kinetics of Microcrystalline Ni-11.5Cr-4.5Co-0.5Al Superalloy Sheet Fabricated by Electron Beam Physical Vapor Deposition at 800 °C

The Synthesis and Characterization of Ultrafine Grain Nial Intermetallic

High-Temperature Oxidation Properties and Microstructural Evolution of Nanostructure Fe-Cr-Al ODS Alloys

Oxidation Behaviour of Microcrystalline Ni-Cr-Al Alloy Coatings at 900°C

Oxidation Kinetics Of Microcrystalline Ni-11.5cr-4.5co-0.5a1 Superalloy Sheet Fabricated By Electron Beam Physical Vapor Deposition At 800 Degrees C

High-temperature Oxidation Behavior of As-Cast Ni-Cr-Al-Fe Based Alloys