Abstract:Titanium carbide, titanium carbonitride or titanium nitride were synthesized by a two-step carbothermic reduction method. In this method, a single-phase precursor TiCnO1-n was firstly prepared from the reaction between titanium dioxide and carbon black in argon atmosphere. Then, the precursor was used as raw materials to prepare TiN, TiCxN1-x or TiC. For the production of TiN or TiCxN1-x, the precursor was further carbothermally reduced and nitrided in nitrogen gas atmosphere. For the production of TiC, the precursor was further reduced by carbon in vacuum. In the first reduction step, it was hard to determine the precise molar ratio of TiO2:C due to the uncontrollable ratio of gaseous products CO and CO2 from TiO2 to TiCnO1-n. Whereas the second step only took place in the high temperature region and the gaseous products were thermodynamically in favor of CO. Therefore, the expected products can be obtained by precisely controlling the carbon addition after analyzing the contents of carbon and oxygen in TiCnO1-n. High purity products were prepared with good dispersivity, narrow size distribution and controllable atomic ratio of C:N. The effects of reduction temperature, reaction time, ball milling and particle sizes of raw material TiO2 were studied in detail. TiN, TiCxN1-x and TiC could be obtained under the same optimum time and temperature of 1773 K for 4 h in first step and 1873 K for 8 h in second step.

A "Chemical-Scissors-Assemble" Route To Titanium Carbide Nanorods

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

A Simple Route to Prepare Nanocrystalline Titanium Carbonitride

Synthesis And Characterization Of Carbide Nanorods

A New Reduction-Carburization Route to Nanocrystalline Tic

TiC Nanorods Derived from Cotton Fibers: Chloride-Assisted VLS Growth, Structure, and Mechanical Properties

A Novel Route To Multiwalled Carbon Nanotubes And Carbon Nanorods At Low Temperature

Tailoring Titanium Carbide Clusters for New Materials: from Met-Cars to Carbon-Doped Superatoms.

Preparations of Titanium Nitride, Titanium Carbonitride and Titanium Carbide Via a Two-Step Carbothermic Reduction Method

Mechanochemically assisted synthesis of titanium carbonitride from metal and organic precursor

Molten salt synthesis of titanium carbide using different carbon sources as templates

Preparation of TiC/W Core–shell Structured Powders by One-Step Activation and Chemical Reduction Process

Synthesis, Characterization, and Catalytic Application of Titanium–cryptomelane Nanorods/fibers

Titania from nanoclusters to nanowires and nanoforks

Formation of Ti or TiC nanopowder from TiO 2 and carbon powders by electrolysis in molten NaCl–KCl

TiC Nanomaterials with Varying Dimensionalities as Anode Materials for Lithium-Ion Batteries

A General Route to Prepare One- and Three-Dimensional Carbon Nanotube/Metal Nanoparticle Composite Nanostructures

Reaction behaviors and specific exposed crystal planes manipulation mechanism of TiC nanoparticles

Ordered Mesoporous Nanocrystalline Titanium‐Carbide/Carbon Composites from in Situ Carbothermal Reduction

A Shear Stress Regulated Assembly Route to Silica Nanotubes and Their Closely Packed Hollow Mesostructures

A NOVEL CHEMICAL SCISSORS ROUTE TO NANOCRYSTALLITES