Influence of Pulse Steepness on Vacuum Surface Flashover Characteristic under Steep Pulse
Zeng-bin WANG,Yong-hong CHENG,Yu CHEN,Man DING,Jia-bin ZHOU,Guo-dong MENG,Kai WU
DOI: https://doi.org/10.13336/j.1003-6520.hve.2009.01.020
2009-01-01
Abstract:To research the vacuum surface flashover mechanism of insulation material under steep high pulsed voltage, considering the steepness of the pulsed voltage, remaining the vacuum on the level of 5 mPa, using 5 kinds of pulse generators (4 ns/25 ns(referring to the rise time and the half-height width time of the pulse), (6~17) ns/300 ns, 20 ns/530 ns, 50 ns/600 ns, 100 ns/550 ns) and 13 kinds of output waveforms, we measured the vacuum flashover voltages of epoxy resin under different steepness. Moreover, 3 kinds of equations were applied to fit the data of different voltage steepness stages. Taking into account of the flashover time delay characteristic and the Lorentz force, the effect mechanism of pulse steepness to the flashover voltage was discussed. The conclusion can be drawn that, when the pulse steepness is very low (below 1.5 kV/ns), the statistical time is the most significant factor affecting the flashover voltage; when the pulse steepness is higher (about some kV/ns to ten kV/ns), the formation time delay becomes another important factor affecting the flashover voltage; when the pulse steepness is very high (above 10kV/ns), the Lorentz force affects the flashover voltage a lot too.