Abstract:This paper proposes a new approach on the processing of silicon production waste (microsilica) as a raw material for metallurgical processing. It is known from practice that the granulometric composition of microsilica does not allow its use in metallurgical processing. The authors of this work propose its use together with a reductant as part of a briquetted charge. In this work, the optimal composition of the charge mixture for briquetting is determined. The main focus is on assessing the strength characteristics of the briquettes and analyzing their efficiency in the silicon smelting process. The strength of the briquettes was studied by the dropping method. As a result, in terms of strength and other characteristics, it is highly advisable to use briquettes consisting of 65% of microsilica and 35% special coke screenings. The obtained batches of high-strength briquettes were tested for the smelting of metallurgical grade silicon in a large-scale laboratory ore-thermal furnace to replace the traditional charge mixtures (high-quality quartzites, petroleum coke, wood chips, etc.) with briquettes. It was established that the briquetted monocharge ensures more intensive reduction processes and improves melting conditions compared to the traditional charge. This leads to higher silicon recovery rates, which was confirmed by tests, during which the maximum recovery rate reached 83.1% with a 30% replacement of the charge with briquettes. The batch of metallurgical silicon with 95-96% of Si content was obtained.

APPLICATION OF MICRO-SILICA AT HOME AND ABROAD

The Application Research and Present Development Situation of Silica Fume Powder Produced from Submerged Arc Furnace Smelting Ferroalloy

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

The Application of Hydrosilylation in Functional Organosilicon Compounds and Materials

A Summary of Silk's Comprehensive Application

Preparation methods and application actuality of silica white

Study on preparation and surface modification of precipitated silica obtained from fly ash

Study on Desulfurization and Denitration of with Industry Solid Waste by Microwave

APPLICATION FUTURE OF DRY AND SEMI-DRY FLUE GAS DESULPHURIZATION IN COAL-FIRED POWER PLANTS

Study of the Microstructure of Industrial Residues and Its Application in High Performance Concrete

Utilisation of Biosilica as Active Silica Source for Metakaolin-Based Geopolymers

An Oveview Of Silica Dust Polution And Controls

Recovery of Chlorosilane Residual Liquid to Prepare Nano-Silica via the Reverse Micro-Emulsion Process

Some Opinions about Domestic Silane Production

A New Approach to the Recycling of Silicon Production Waste (Microsilica) as a Raw Material for Metallurgical Processing

Resource utilization of chlorosilane residual liquid to prepare nano-silica in reverse microemulsion system

Amorphous Silica: prepared by byproduct microsilica in the ferrosilicon production and applied in amorphous silica-TiO 2 composite with favorable pigment properties

Application of silica fume in high-volume fly ash self-compacting recycled aggregate concrete

THE USE OF MICRO-SILICA TO IMPROVE THE COMPRESSIVE AND FLEXURAL STRENGTH OF CONCRETE

Comparative Study of Effect of Raw and Densified Silica Fume in the Paste, Mortar and Concrete

Distribution, Migration and Transformation of Siloxanes in Environment and Its Impact on Biogas Application