Abstract:Siloxanes are widely used in different applications: health care, dry cleaning, household products, paints and coatings, paper, personal care, for example. This explains their prevalence in the environment. Because of their volatile nature, most of the time they are dispersed in the atmosphere, but they can also be present in the slurry from landfills. During anaerobic digestion, when the temperature goes up to 60 degrees C, siloxanes are volatilized, forming part of the biogas. Operational problems using biogas to produce energy, heat and hydrogen have been identified. At high temperatures the siloxanes are transformed into silicate dioxide (commonly called sand transmission). These white deposits may adhere to metal or catalytic substrate surfaces, seriously reducing equipment efficiency, and this can be a reason for changing equipment warranties. Consequently, elimination of siloxanes has become very important. Unfortunately, relatively little information can be found on this subject. Nevertheless some authors have described different analytical methods for siloxane quantification, and recent studies have looked at the presence of siloxanes in landfills and the restriction on the energy recovery equipment using the biogas produced. The growing consumption of siloxanes and silicones in industrial processes consequently increase their prevalence in the environment, hampering the use of biogas as a source of 'green energy'. Therefore, the principal focus of this study is the treatment of siloxanes. Their elimination was carried out using an adsorption process with four different porous materials: activated carbon cloths (ACC), granular activated carbon (GAC), zeolite and silica gel. Two representative siloxane compounds were used in this study, hexamethyldisiloxane (L2) and octamethylcyclotetrasiloxane (D4). Adsorption kinetics and isotherms in batch reactors were performed. It was observed that the mass transfer into the porous material was more rapid for the activated carbon than for the zeolite and silica gel, congruent with the porous structure of the material. Moreover, it was found that D4 is more adsorbable than L2, due to possible interactions between the solid surface and the physical structure of the cyclic compound (D4). The influence of humidity and temperature were also studied. The increase in the temperature reduced the adsorption capacities. The influence of humidity on the adsorption was investigated under dry air and humid air at 70%. No significant difference in the adsorption capacities was found for the activated carbon and for the zeolite, but for the silica gel the mass transfer decreased considerably. For the adsorption isotherms, the maximal capacity of elimination was obtained with the activated carbon materials and was directly related to the porous structure. Thus activated carbon cloth was chosen to design the adsorption-desorption processes in a dynamic system. Thermal heating was used to achieve the regeneration process. Initial cycles have been accomplished and show the stability of the process.

Distribution, Migration and Transformation of Siloxanes in Environment and Its Impact on Biogas Application

Advances in Technologies for in Situ Desulfurization of Biogas

Development of Biogas Purification and Upgrading Technologies for Producing Bio-Methane

Enhanced Removal of Methanethiol and Its Conversion Products in the Presence of Methane in Biofilters

Assessment of the Major Odor Contributors and Health Risks of Volatile Compounds in Three Disposal Technologies for Municipal Solid Waste.

Dynamic release of siloxanes in the form of biogas from simulated municipal-solid-waste landfill and the corresponding driving mechanism

Microaeration promotes volatile siloxanes conversion to methane and simpler monomeric products

Review of recent findings on occurrence and fates of siloxanes in environmental compartments

Siloxane treatment by adsorption into porous materials

Protecting human health and the environment against siloxanes: The role and effectiveness of wastewater treatment technologies

Performance and Optimization of Integrated Biogas Bio-desulfurization Reactor

Combined Biological Method for Simultaneous Removal of Hydrogen Sulphide and Volatile Methylsiloxanes from Biogas

Some Opinions about Domestic Silane Production

Silica-Based Materials in Methane Conversion: A Two-Decade Bibliometric and Literature Review (1995–2022)

Effect of surfactant addition on the biofiltration of siloxane-contaminated gas streams

Phenylmethylsiloxanes and trifluoropropylmethylsiloxanes in municipal sludges from wastewater treatment plants in China: Their distribution, degradation and risk assessment

Techno-economic and sustainability analysis of siloxane removal from landfill gas used for electricity generation

Biogas Pollution and Mineral Deposits Formed on the Elements of Landfill Gas Engines

Design and Performance of an Adsorption Bed with Activated Carbons for Biogas Purification

Research progress and perspectives of biogas production from municipal organic solid waste

Discovering the Interference of Hydrogen Sulfide on Polyethylenimine-Functionalized Porous Resin for Biogas Upgrading Via CO2 Adsorption