Abstract:Siloxanes are widely used in different applications: health care, dry cleaning, household products, paints and coatings, paper, personal care, for example. This explains their prevalence in the environment. Because of their volatile nature, most of the time they are dispersed in the atmosphere, but they can also be present in the slurry from landfills. During anaerobic digestion, when the temperature goes up to 60 degrees C, siloxanes are volatilized, forming part of the biogas. Operational problems using biogas to produce energy, heat and hydrogen have been identified. At high temperatures the siloxanes are transformed into silicate dioxide (commonly called sand transmission). These white deposits may adhere to metal or catalytic substrate surfaces, seriously reducing equipment efficiency, and this can be a reason for changing equipment warranties. Consequently, elimination of siloxanes has become very important. Unfortunately, relatively little information can be found on this subject. Nevertheless some authors have described different analytical methods for siloxane quantification, and recent studies have looked at the presence of siloxanes in landfills and the restriction on the energy recovery equipment using the biogas produced. The growing consumption of siloxanes and silicones in industrial processes consequently increase their prevalence in the environment, hampering the use of biogas as a source of 'green energy'. Therefore, the principal focus of this study is the treatment of siloxanes. Their elimination was carried out using an adsorption process with four different porous materials: activated carbon cloths (ACC), granular activated carbon (GAC), zeolite and silica gel. Two representative siloxane compounds were used in this study, hexamethyldisiloxane (L2) and octamethylcyclotetrasiloxane (D4). Adsorption kinetics and isotherms in batch reactors were performed. It was observed that the mass transfer into the porous material was more rapid for the activated carbon than for the zeolite and silica gel, congruent with the porous structure of the material. Moreover, it was found that D4 is more adsorbable than L2, due to possible interactions between the solid surface and the physical structure of the cyclic compound (D4). The influence of humidity and temperature were also studied. The increase in the temperature reduced the adsorption capacities. The influence of humidity on the adsorption was investigated under dry air and humid air at 70%. No significant difference in the adsorption capacities was found for the activated carbon and for the zeolite, but for the silica gel the mass transfer decreased considerably. For the adsorption isotherms, the maximal capacity of elimination was obtained with the activated carbon materials and was directly related to the porous structure. Thus activated carbon cloth was chosen to design the adsorption-desorption processes in a dynamic system. Thermal heating was used to achieve the regeneration process. Initial cycles have been accomplished and show the stability of the process.

Dynamic release of siloxanes in the form of biogas from simulated municipal-solid-waste landfill and the corresponding driving mechanism

Investigation of Volatile Methyl Siloxanes in Biogas and the Ambient Environment in a Landfill

Cyclic Phenylmethylsiloxane Oligomers in Municipal Landfills and Their Elimination Mechanisms in Leachate Treatment Processes

Evaluation of Methane Oxidation Activity in Waste Biocover Soil During Landfill Stabilization.

Assessment of the Major Odor Contributors and Health Risks of Volatile Compounds in Three Disposal Technologies for Municipal Solid Waste.

Methanethiol generation potential from anaerobic degradation of municipal solid waste in landfills

Characterization of H2S Removal and Microbial Community in Landfill Cover Soils

The Occurrence and Fate of Siloxanes in Wastewater Treatment Plant in Harbin, China

Distribution, Migration and Transformation of Siloxanes in Environment and Its Impact on Biogas Application

Influence of Sampling Methods and Storage Condition on Volatile Methyl Siloxanes Quantification in Biogas

Microaeration promotes volatile siloxanes conversion to methane and simpler monomeric products

Siloxane treatment by adsorption into porous materials

Dimethyl Sulfide Emission Behavior from Landfill Site with Air and Water Control

Phenylmethylsiloxanes and trifluoropropylmethylsiloxanes in municipal sludges from wastewater treatment plants in China: Their distribution, degradation and risk assessment

Distribution and Elimination of Trifluoropropylmethylsiloxane Oligomers in Both Biosolid-Amended Soils and Earthworms

Occurrence and Behavior of Methylsiloxanes in Urban Environment in Four Cities of China

Simulated Study on Methane Oxidation in Landfill Cover Soil

Field Investigation of Temporal Variation of Volatile Organic Compounds at a Landfill in Hangzhou, China

Effect of toluene on siloxane biodegradation and microbial communities in biofilters

Unraveling the Distribution Characteristic of Cyclic Volatile Methylsiloxanes in Various Environmental Media of a Wastewater Treatment Plant

N2O Fluxes from Sanitary and Bioreactor MSW Landfill in the Summer