Abstract:Catalytic combustion has been widely applied to remove the trace combustible pollutants. However, the earth-abundant and high-performance nanocatalysts are still the main research focus on promoting catalytic efficiency. Herein, the Cu and Mn mixed oxides supported on TiO2 nanoparticles with various Cu and Mn molar contents synthesized via the flame spray pyrolysis (FSP) technique are utilized in the catalytic oxidation of lean CO and CH4. Initially, the Cu–Mn/TiO2 nanocatalysts are composed of spherical structures with a diameter of about 20 nm, whose specific surface area is between 60 and 90 m2/g. The Cu element is more evenly distributed on the TiO2 surface than the Mn element, owing to the distinctly different ion radii. Both the copper and manganese cations could incorporate into the TiO2 lattice, which generates oxygen vacancies and enhances the diffusion of oxygen ions, causing the transformation of the antanse to rutile phase. When the molar content of the Cu–Mn increases to less than 30 mol %, the temperature of its reduction peak keeps decreasing due to the hydrogen spillover effect. Moreover, the catalytic performances of the Cu–Mn/TiO2 with 12 mol % loading (12CMT) are all optimal during the low-temperature and the high-temperature stages, which are superior to the FSP-made copper manganese or copper titanium oxides. This is attributed to the small crystal particles, highly dispersed active components of CuOx and MnOx, and the higher ratios of Cu1+/Cu and Mn4+–Oads Lewis acid–base pairs. In addition, the strong interaction between Cu–Mn components and rutile phase support can tremendously promote the activity of catalytic combustion. Under the simulated flue gas, the catalytic properties of 12CMT decreases in comparison with those of CO and CH4 mixed gas due to the introduction of CO2. Ultimately, the Cu–Mn/TiO2 samples exhibit the outstanding water resistance, thanks to the hydrophobization of the catalyst surface.This article has not yet been cited by other publications.

Catalytic Combustion of Formaldehyde over Cu-doped Mn-Ce-O Solid Solution Catalysts

In-situ Synthesis of Monolithic Cu-Mn-Ce/cordierite Catalysts Towards VOCs Combustion

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Toluene Catalytic Combustion over Copper Modified Mn0.5Ce0.5 Ox Solid Solution Sponge-Like Structures

A Comparative Study on Ce–Pr and Ce–Mn Mixed Oxide Catalysts Toward Soot Catalytic Combustion

Catalytic Oxidation of Formaldehyde by MnCo3MOx Catalyst: Effect of Rare Earth Elements and Temperature

MnOx–CeO2 Mixed Oxide Catalysts for Complete Oxidation of Formaldehyde: Effect of Preparation Method and Calcination Temperature

The influence of doping amount on the catalytic oxidation of formaldehyde by Mn-CeO2 mixed oxide catalyst: A combination of DFT and microkinetic study

Improved activity and stability for chlorobenzene oxidation over ternary Cu-Mn-O-Ce solid solution supported on cordierite

Combustion Synthesis of Non-Precious CuO-CeO2 Nanocrystalline Catalysts with Enhanced Catalytic Activity for Methane Oxidation

Revealing the intrinsic nature of Cu- and Ce-doped Mn3O4 catalysts with positive and negative effects on CO oxidation using operando DRIFTS-MS

Cu-Mn-Ce ternary mixed-oxide catalysts for catalytic combustion of toluene

Pt/MnOx–CeO2 catalysts for the complete oxidation of formaldehyde at ambient temperature

Revealing the intrinsic nature of Cu- and Ce-doped Mn 3 O 4 catalysts with positive and negative effects on CO oxidation using operando DRIFTS-MS

Enhanced formaldehyde oxidation over MnO2 and doped manganese-based catalysts: Experimental and theoretical Insights into mechanism and performance

Construction of strongly-coupled CeO 2 /MnO 2 heterogeneous catalysts for highly-efficient removal of formaldehyde

Transition metal-doped modification of lattice defects in formaldehyde catalysts − Controlling the specific surface area and mass transfer

Preparation,Characterization and Catalytic Performance of CuO/Mn_2O_3/γ-Al_2O_3 Catalysts over CO Oxidation

MnOx–CeO2 Derived from Mn–Ce-MOFs with Highly Efficient Removal of Formaldehyde

One-Step Synthesis of Nanostructured Cu–Mn/TiO 2 via Flame Spray Pyrolysis: Application to Catalytic Combustion of CO and CH 4

Two-step hydrothermal synthesis of highly active MnOx-CeO2 for complete oxidation of formaldehyde