Abstract:Synthesis of catalysts with high catalytic degradation activity for formaldehyde (HCHO) at room temperature is highly desirable for indoor air quality control. Herein, a novel K-Mn3O4@CeO2 catalyst with excellent catalytic oxidation activity toward HCHO at near room temperature was reported. In particular, the K addition in K-Mn3O4@CeO2 considerably enhanced the oxidation activity, and importantly, 99.3 % conversion of 10 mL of a 40 mg/L HCHO solution at 30 °C for 14 h was achieved, with simultaneous strong cycling stability. Moreover, the addition of K species considerably influenced the chemical valence state of Mn from +4 (ε-MnO2) to +8/3 (Mn3O4) on the surface of CeO2, which obviously changed the tunnel structure and the number of oxygen vacancies. One part of K species is uniformly dispersed on K-Mn3O4@CeO2, and the other part exists in the tunnel structure of Mn3O4@CeO2, which is mainly used to balance the negative charge of the tunnel and prevent collapse of the structure, providing enough active sites for the catalytic oxidation of HCHO. We observed a phase transition from tunneled KMnO2 to Mn3O4 to tunneled MnO2 with the decreasing K+ content, in which K-Mn3O4@CeO2 exhibited higher HCHO oxidation activity. In addition, K-Mn3O4@CeO2 exhibited lower oxygen vacancy formation and HCHO adsorption energies in aqueous solution based on density functional theory calculations. This is because the K species provide more active oxygen species and richer oxygen vacancies on the surface of K-Mn3O4@CeO2, promote the mobility of lattice oxygen and the room-temperature reduction properties of oxygen species, and enhance the ability of the catalyst to replenish the consumed oxygen species. Finally, a possible HCHO catalytic oxidation pathway on the surface of K-Mn3O4@CeO2 catalyst is proposed.

Two-step hydrothermal synthesis of highly active MnOx-CeO2 for complete oxidation of formaldehyde

MnOx–CeO2 Derived from Mn–Ce-MOFs with Highly Efficient Removal of Formaldehyde

Catalytic Ozonation of Formaldehyde with an Oxygen-Vacancy-Rich MnOx/γ-Al2O3 Catalyst at Room Temperature

Oxygen vacancy-rich K-Mn3O4@CeO2 catalyst for efficient oxidation degradation of formaldehyde at near room temperature

Preparation of porous MnO2/CeO2 composite for the effective removal of formaldehyde from air

Construction of strongly-coupled CeO 2 /MnO 2 heterogeneous catalysts for highly-efficient removal of formaldehyde

Pt/MnOx–CeO2 catalysts for the complete oxidation of formaldehyde at ambient temperature

Enhanced formaldehyde oxidation over MnO2 and doped manganese-based catalysts: Experimental and theoretical Insights into mechanism and performance

Sepiolite-Supported Manganese Oxide as an Efficient Catalyst for Formaldehyde Oxidation: Performance and Mechanism

Ozone catalytic oxidation of low-concentration formaldehyde over ternary Mn-Ce-Ni oxide catalysts modified with FeOx

Mesoporous MnCeOx Solid Solutions for Low Temperature and Selective Oxidation of Hydrocarbons.

A Comparative Study of Formaldehyde and Carbon Monoxide Complete Oxidation on MnOx-CeO2 Catalysts

High Surface Area Au/CeO2 Catalysts for Low Temperature Formaldehyde Oxidation

Ce–Fe–Mn Ternary Mixed-Oxide Catalysts for Catalytic Decomposition of Ozone at Ambient Temperatures

Simultaneously Catalytic Decomposition of Formaldehyde and Ozone over Manganese Cerium Oxides at Room Temperature: Promotional Effect of Relative Humidity on the MnCeOx Solid Solution

The influence of doping amount on the catalytic oxidation of formaldehyde by Mn-CeO2 mixed oxide catalyst: A combination of DFT and microkinetic study

Constructing α-MnO2/Mn2O3 heterojunction for formaldehyde oxidation

Preparation of Mn-Fe Oxide by a Hydrolysis-Driven Redox Method and Its Application in Formaldehyde Oxidation

Highly dispersed Fe-Ce mixed oxide catalysts confined in mesochannels toward low-temperature oxidation of formaldehyde

Mn/HZSM-5 catalyst with high content of Mn 4+ and surface hydroxyls for formaldehyde oxidation at room temperature

MnOx–CeO2 Mixed Oxide Catalysts for Complete Oxidation of Formaldehyde: Effect of Preparation Method and Calcination Temperature