Abstract:Intra-ply or inter-ply slippages are commonly seen at the crack tip impinging upon an interface in laminated anisotropic bodies. An interface slippage could occur in the form of yielding (e.g., a well-bonded ductile layer with plastic yielding) or debonding (e.g., a weak, sliding-free one) along the interface direction. This paper presents a fundamental solution for a crack in one individual brittle part impinging normally upon the interface slippage with the neighboring brittle part of laminated anisotropic materials under tensile loading. A superposition method is employed to explicitly solve the problem which combines the solution of a crack in a perfectly bonded elastic homogeneous medium, the solution of a continuous distribution of dislocations which represent slippage at the interface and an appendix solution which offsets the stress on the crack faces induced by the dislocations. This procedure reduces the problem to a singular integral equation which can be numerically solved by using Chebyshev polynomials. The validity of the present solutions is numerically verified where the traction-free condition on the crack faces and the equilibrium of shear stress along the interface slippage can be really satisfied. Numerical implementations are performed to analyze the influence of interface slippage on cracking and stress redistribution in laminated anisotropic bodies. It is found that interface yielding or interface debonding redistributes the stress ahead of the crack tip in the neighboring uncracked part. The presence of interface yielding or debonding lowers the high stress concentration in the tensile stresses ahead of the crack tip. It is also concluded that interface debonding appears to be more effective in lowering the stress concentration than interface plastic yielding.

High-speed Self-Similar Debonding of an Interface Between Two Orthotropic Materials: the Anti-Plane Shear Case

Mechanics of dynamic debonding

Debonding of an Elastic Inhomogeneity of Arbitrary Shape in Anti-Plane Shear

Two perfectly-bonded dissimilar orthotropic strips with an interfacial crack normal to the boundaries

On Interface Crack Propagation with Variable Velocity for Longitudinal Shear Problems

Interfacial Debonding of an Orthotropic Half-Plane Bonded to a Rigid Foundation

Smooth Interface Crack Between Two Bonded Dissimilar Orthotropic Elastic Media under Shear Loading

Fracture Analysis of Mode-Ii Crack Perpendicular to Imperfect Bimaterial Interface

Interface Crack Embedded in a Bi-Material Plane under Shear and Compression

Dynamic-Response of Mode-Iii Interface Crack in Bonded Materials

A finite length crack propagating along the interface of two dissimilar magnetoelectroelastic materials

A Unified Method for Subsonic and Intersonic Crack Growth along an Anisotropic Bimaterial Interface

Dynamic Behaviors of Mode III Interfacial Crack under a Constant Loading Rate

Subsonic Interface Crack with Crack Face Contact

Interface Stress of Orthotropic Materials with A Nanodefect under Antiplane Shear Loading

Mode-III Interface Edge Crack Between Two Bonded Quarter-Planes of Dissimilar Piezoelectric Materials

Mode III Yoffe Dynamic Crack Problem on the Interface Between Dissimilar Materials

Anti-plane Shear Crack Normal to and Terminating at the Interface of Two Bonded Piezoelectric Ceramics

Fundamental Solutions of a Crack Impinging Upon an Interface Slippage in Laminated Anisotropic Bodies

Interface Cracks with Surface Elasticity in Anisotropic Bimaterials

Exact solution for mixed boundary value problems at anisotropic piezoelectric bimaterial interface and unification of various interface defects