Abstract:In wheel rail adhesion studies, most of the test rigs used are simplified designs such as a single wheel or wheelset, but the results may not be accurate. Alternatively, representing the complex system by using a full vehicle model provides accurate results but may incur complexity in design. To trade off accuracy over complexity, a bogie model can be the optimum selection. Furthermore, only a real time model can replicate its physical counterpart in the time domain. Developing such a model requires broad expertise and appropriate software and hardware. A few published works are available which deal with real time modeling. However, the influence of the control system has not been included in those works. To address these issues, a real-time scaled bogie test rig including the control system is essential. Therefore, a 1:4 scaled bogie roller rig is developed to study the adhesion between wheel and roller contact. To compare the performances obtained from the scaled bogie test rig and to expand the test applications, a numerical simulation model of that scaled bogie test rig is developed using Gensys multibody software. This model is the complete model of the test rig which delivers more precise results. To exactly represent the physical counterpart system in the time domain, a real-time scaled bogie test rig (RT SBTR) is developed after four consecutive stages. Then, to simulate the RT-SBTR to solve the internal state equations and functions representing the physical counterpart system in equal or less than actual time, the real-time simulation environment is prepared in two stages. To such end, the computational time improved from 4 times slower than real time to 2 times faster than real time. Finally, the real time scaled bogie model is also incorporated with the braking control system which slightly reduces the computational performances without affecting real time capability.

Gravity Compensation for Rocker-bogie Rovers Through Single String Tension

Modeling and Control of the Pneumatic Constant Pressure System for Zero Gravity Simulation

Research on geologic adaptive control of ground pressure for single gripping TBM

Development and key technologies of pneumatic suspension system for zero-gravity simulation

Configuration design and kinematic performance analysis of a parallel wheelset suspension for a multi-wheeled pressurized lunar rover

Real‐Time Heading Correction Control for Mars Rovers Considering Travel Terrain Differences Between Two Sides of the Suspension

Research on Ground Microgravity Simulation System Based on Parallel Mechanism

Simultaneous control of trajectory tracking and coordinated allocation of rocker-bogie planetary rovers

Experiment Research of Gravity Compensation for Haptic Device

Enabling Faster Locomotion of Planetary Rovers with a Mechanically-Hybrid Suspension

Simultaneous Control of Terrain Adaptation and Wheel Speed Allocation for a Planetary Rover With an Active Suspension System

Design of the Wearable Spatial Gravity Balance Mechanism

A Gravity Compensation Algorithm of Robot Manipulator Control based on the Trigonometric Function

A comprehensive wheel-terrain contact model for planetary exploration rover design optimization

Center of Gravity Compensation for Dynamically-Balanced Two-Wheeled Wheelchair System

Theoretical and Experimental Investigations on High-Precision Micro-Low-Gravity Simulation Technology for Lunar Mobile Vehicle

Research on Gravity Compensation System of Planetary Rover Based on Electrodynamic Suspension

Analysis of sinkage of rigid driving wheel rolling on simulant lunar soil

Real time multibody modeling and simulation of a scaled bogie test rig

Anti-Swaying Control Strategy of Ship-Mounted 3-RCU Parallel Platform Based on Dynamic Gravity Compensation

Design methodology, synthesis, and control strategy of the high-speed planetary rover