Anti-Swaying Control Strategy of Ship-Mounted 3-RCU Parallel Platform Based on Dynamic Gravity Compensation

Zhiyuan Lv,Pengfei Liu,Donghong Ning,Shuqing Wang
DOI: https://doi.org/10.3390/machines12030209
IF: 2.899
2024-03-22
Machines
Abstract:It is essential to ensure stability during marine transportation or the installation of high center of gravity loads. The heavy loads increase gravity disturbance, affecting the steady-state-error control of the multiple degrees of freedom (DOFs) motion compensation platform. In this paper, we propose a proportional derivative (PD) controller with dynamic gravity compensation (PDGC) for a 3-RCU (revolute–cylindrical–universal) parallel platform to improve the control effect of marine motion compensation for high center of gravity loads. We introduce an evaluation parameter of load stability and a weighting coefficient of anti-swaying control to tune the controller performance. The controller can set its control target between the two, keeping the load contact surface level and allowing the load center of gravity with the least movement. By deriving the Jacobian matrix, the gravity disturbance in the joint space is calculated and is compensated in the controller. First, we verify the control superiority of this controller over the PD controller under sinusoidal excitation in simulation and validate the effectiveness of the proposed anti-swing strategy. Then, the experiments are conducted with random excitation. The root mean square (RMS) value of the load's residual angle with the proposed controller is reduced to 32.2% and 17.6% in two directions, respectively, compared with the PD controller under class 4 sea state excitation. The proposed method is effective for the anti-swaying control of ship-mounted 3-RCU parallel platforms.
engineering, mechanical, electrical & electronic
What problem does this paper attempt to address?
The problem that this paper attempts to solve is how to ensure the stability when transporting or installing high - center - of - gravity loads in ocean transportation. Specifically, for the ship - borne 3 - RCU parallel platform, the paper proposes an anti - sway control strategy based on dynamic gravity compensation to improve the steady - state error control effect of high - center - of - gravity loads on the multi - degree - of - freedom motion compensation platform. It is mentioned in the paper that heavy loads will increase gravitational interference and affect the steady - state error control of the multi - degree - of - freedom motion compensation platform. Therefore, the author proposes a proportional - derivative (PD) controller with dynamic gravity compensation (PDGC), aiming to improve the control effect of ocean motion compensation, especially when dealing with high - center - of - gravity loads. To achieve this goal, the author introduces the evaluation parameters of load stability and the weight coefficient of anti - sway control to adjust the controller performance. By deriving the Jacobian matrix, the gravitational interference in the joint space is calculated and compensated in the controller. In addition, the author also verifies through simulation that the proposed controller has better control advantages than the traditional PD controller under sinusoidal excitation, and verifies the effectiveness of the proposed anti - sway strategy through experiments. The experimental results show that under the excitation of sea state 4, after using the proposed controller, the root - mean - square values of the load residual angles are reduced by 32.2% and 17.6% respectively, indicating that this method is effective for the anti - sway control of the ship - borne 3 - RCU parallel platform.