Abstract:The performance of the ultrasonic transducer will directly affect the accuracy of ultrasonic experimental measurement. Therefore, in order to meet the requirements of a wide band, a kind of annular 2-2-2 piezoelectric composite is proposed based on doped PDMS. In this paper, the transducer structure consisted of PZT-5A piezoelectric ceramics and PDMS doped with 3 wt.% Al2O3:SiO2 (1:6) powder, which constituted the piezoelectric composite. MATLAB and COMSOL software were used for simulation. Meanwhile, the electrode materials were selected. Then, the performance of the designed annular 2-2-2 ultrasonic transducer was tested. The simulation results show that when the polymer phase material of the piezoelectric ultrasonic transducer is doped PDMS, the piezoelectric phase and the ceramic substrate account for 70% of the total volume, the polymer phase accounts for 30% of the total volume, and the maximum frequency band width can reach 90 kHz. The experimental results show that the maximum bandwidth of −3 dB can reach 104 kHz when the frequency is 160 kHz. The results of the electrode test show that the use of Cu/Ti electrode improves the electrical conductivity of the single electrode. In this paper, the annular 2-2-2 transducer designed in the case of small volume had the characteristics of a wide frequency band, which was conducive to the miniaturization and integration of the transducer. Therefore, we believe that the annular 2-2-2 piezoelectric composite has broad application prospects.

Design of a digital high accuracy power supply for piezoelectric ceramics

Tracking Control of Piezoceramic Actuators by Using Preisach Model

Design, Control and Application of a PZT-driven Micro-stage

Development of a High-Power Testing System for Piezoelectric Ceramic Material

Charge Controller with a Novel Hysteresis Disturbance Observer for High-Accuracy Trajectory Tracking of Piezoelectric Actuators

Enhancing the piezoelectric properties and thermal stability of PMN-PMS-PSZT high-power piezoelectric ceramics through defect engineering

Design Of A Piezoelectric Exciter Actuator For Micro-Displacement Control - Theory And Experiment

Piezoelectirc Actuated Precise Positioning System Based On A New Hysteresis Model

Design of Piezoelectric Ultrasonic Transducer Based on Doped PDMS

A Piezoelectric Ceramic Actuator Drive DC Adjustable Driving Power Supply Design

A Driving Power Supply for Piezoelectric Transducers Based on an Improved LC Matching Network

Research and Design of Ultrasonic Power for Ceramic Grinding

Power harvesting with PZT ceramics and circuits design

A new amplifier for improving piezoelectric actuator linearity based on current switching in precision positioning

An Improved Piezoelectric Ceramic High Voltage Driving Power Based on Constant Current Source

Development of a Dynamic Driving Line Power for Piezoelectric Ceramic Actuator

Improving performances of PZT-PMS-PMT ceramics through rational tuning of Al3+-ion doping

Feedback linearization and equivalent-disturbance compensation control strategy for piezoelectric stage

Study on the Control Method about Improving Piezoelectric Actuated Photoelectric Precision Tracking System

Piezoelectric Driver Based on Current Control

Development of a Novel High Precision Piezoelectric Linear Stepper Actuator