Abstract:Since the research toward high-power millimeter-wave generator becomes a tendency in high-power microwave, overmoded structure with the high-order mode has been a considerable interest because of its potential to increase power handling capacity (PHC). To expand the PHC of V-band transit-time oscillator and excite higher mode TM03, a dual annular multiple-beam cathode has been proposed. In the geometric structure of the dual annular multiple-beam diode, cathode rods around two concentric circles are uniformly placed on cathode base, and each circle has several graphite rods. Because of space charge shielding effect and fluctuation of electron beam, explosive emission current of inner and outer cathode circles is difficult to be balanced, and the electron beam transmission rate is not very high. To solve those two problems, the relative length (ΔL) and the relative radius (Δr) between the inner and outer cathode circles are optimized to obtain balanced currents of inner and outer beams and a good transmission rate. In this paper, the preliminary study of a dual annular multiple-beam cathode is carried out by optimizing the cathode structure. When ΔL and Δr are equal to 2.5 and 4 mm, respectively, the dual annular multiple-beams cathode can provide 2.71 kA uniform intense relativistic electron beams under 421 kV, and the magnetic field is 1.2T. As a simulation result, explosively emitted and the 95.2% of total beam current transmission rate can be reached.

Theoretical analysis and simulation study on inward-emitting coaxial vircator

Two-dimensional Theoretical Analysis of the Dominant Frequency in the Inward-Emitting Coaxial Vircator

Numerical Simulation Study On The Interaction Of The Beam And Cavity Modes In An Inward-Emitting Coaxial Virtual Cathode Oscillator

Mode Analysis of High-Power Microwave Generation in the Inward-Emitting Coaxial Vircator Based on Computer Simulation

Optimization of an Inward-Emitting Coaxial Vircator

Electrothermal modeling of coaxial through silicon via (TSV) for three-dimensional ICs

Efficient Analytical Model for the Transfer Impedance and Admittance of Noncoaxial/Twinax Braided–Shielded Cables

Preliminary study of dual annular multiple-beam cathode for V-band coaxial transit-time oscillator

Electrical–Thermal Cosimulation of Coaxial TSVs with Temperature-Dependent MOS Effect Using Equivalent Circuit Models

An Efficient Inverted Relativistic Magnetron With Virtual Cathode

Numerical simulation of cold emission in coaxial diode with magnetic isolation

Experimental Investigation into the Optimum Position of a Ring Reflector for an Axial Virtual Cathode Oscillator

Microwave characteristics analysis of coplanar electrodes in III-V semiconductors traveling-wave modulators

Analysis and Design of X-Band Coaxial Multi-Beam Relativistic Klystron Amplifier

A Compact V-Band Transit Time Oscillator with Reflective Modulation Cavity

Simulation of an Axial Vircator

Starting Current of Coaxial Relative Backward Wave Oscillator

Investigation on a high-power V-band transit-time oscillator under a low guiding magnetic field with a focusing cathode

High Frequency Characteristics of A Magnetically Insulated Transmission Line Oscillator Oscillating in Hem11 Mode

Study of a Dual-Mode Multibeam Interaction Circuit With Coaxial Structure for Ka-Band High-Power EIK

Numerical simulation on terahertz extended-interaction oscillator with disk-loaded waveguide