Abstract:The electro-hydraulic hybrid cutterhead driving system is a newly developed innovative cutterhead driving system of tunnel boring machine. Regulating the cutterhead rotational speed, balancing the driving load and the torque control of the hydraulic motors are three essential issues of the electro-hydraulic hybrid cutterhead driving system to be addressed. The conventional synchronization method focuses on pure rotational speed regulation only and therefore causes serious unbalanced driving torque phenomena in the cutterhead driving system. In this article, a cascade control scheme is proposed which is, namely, grouped into three control levels. In the high level, a nonlinear disturbance observer-based integral sliding mode control strategy integrated with anti-windup technique scheme is proposed to guarantee the tracking accuracy of the cutterhead rotational speed. Furthermore, the total driving torque of the electro-hydraulic hybrid cutterhead driving system is estimated by the disturbance observer. The middle level is the driving torque distributor which generates the torque reference for each driving unit. Owing to the nonlinear characteristics of the hydraulic system, an adaptive robust controller is introduced to guarantee the output torque of hydraulic motors and to track the torque reference signal. The torque tracking performance of electromotors is guaranteed by the converter. The co-simulations are carried out to verify the effectiveness and performance of the proposed cascade control scheme. The results show that the proposed control system can guarantee the cutterhead rotational speed tracking performance while overcome the biased load problems in pinion-ring gear transmission system of electro-hydraulic hybrid cutterhead driving system.

Development of Control System of Heavy Duty AC Electric Haulage Shearer for High Cutting Height and Deep Inclined Seam

A Numerical Control System for Shearing Machine

Design and Application of Distributed Control System for High Speed Paper Machine

Supervisory Control of Thrust Hydraulic System for Shield Tunnelling Machine

Research into the intelligent control of the cutter head drive system in Shield tunnelling machine based on the pattern recognition

Dynamic Characteristics of the Over-Actuated Cutterhead Driving System in Tunnel Machine

A Hydraulic System for Cutterhead of Shield Tunnel Boring Machine

Past, Present, and Future of Power Drive Control Technique for Mine Hoists in China

Development of MG750/1815-GWD AC Electric-haulage Shearer

An Effective Method for Longwall Automation in Thin Coal Seam.

A novel cutterhead cascade control strategy for hybrid-driving tunnel boring machines

Synchronously Running Control Method for Four Machines of Double-Side Shear

Study and realization of vector-controlled cycloconverter-fed synchronous machine drive for mine hoist

Study and Development of Automatic Control System for Chamfering Machine Based on PLC

Design of Automatic Control System of Boom Roadheader

Research on and Design of an Electric Drive Automatic Control System for Mine Belt Conveyors

Control Design of a Hydraulic Cooling Fan Drive for Off-Road Vehicle Diesel Engine with a Power Split Hydraulic Transmission

An Advanced Selective Hydraulic Control System for the Heavy-duty Rough Grinding Machine

The Design of the Control System on the Upper Computer of the Cutting Machine

Design and Application of State Monitoring and Fault Diagnosis System for Main Electromotor of High Speed Wire Rolling Sets

Heavy-load Electric Locomotives Technical Design and Development