Abstract:The high temperature ablation behavior of tungsten composites containing carbides produced by vacuum hot pressing is studied as a function of reinforcement chemistry (ZrC and TiC) and content using a self-made oxyacetylene ablation equipment. A dynamic responding multiwavelength pyrometer was employed to measure the temperature of the ablation surface, and a thermocouple was employed to measure the temperature of the back surface during the time that a specimen was being ablated. The mass and linear ablation rates are lower in composites containing ZrC, decreasing with increasing particle content in both composites system. The values of the mass and linear ablation rates were in the order from high to low: W>30TiC/W>40TiC/W>30ZrC/W>40ZrC/W (30TiC/W stands for 30 vol.% TiC particle content in the W matrix, the same below). The important temperature curves of the ablation surfaces of specimens were successfully detected online. Ablated surfaces and vertical sections of the specimens were investigated using scanning electron microscopy (SEM) and X-ray diffraction (XRD). Thermochemical oxidation of tungsten, TiC, and ZrC was the main ablation mechanism of ZrC/W and TiC/W composites. These ablation behaviors are discussed based on the thermophysical and chemical properties of both the composite systems.

High-temperature Ablation Behavior of TiB2-Cu Matrix Cermets

Ablation-Resistance of Combustion Synthesized TiB2-Cu Cermet: Ablation-Resistance of Combustion Synthesized Cermet

Study on the Behavior in Thermal Shock and Ablation Resistance of TiC-TiB2/Cu Ceramic-Matrix Composite

Thermal Shock Resistance and Ablation Behavior of Tib2-Cu-Ni Composite Via Combustion Synthesis

Thermal Shock Resistance and Ablation Behaviour of Titanium Diboride-Copper-Nickle Fgm Via Shs

Thermal Ablation Resistance of Melt-Infiltrated Titanium Diboride-(Copper, Nickel) Composites

Preparation and thermal ablation behavior of titanium diboride/(copper, nickel) C4 material

Microstructural Characterization and Ablation Mechanism of TiB2/(Cu,Ni) Melt-Infiltrated Ceramic Composite

Ablation of Tungsten Matrix Composites Reinforced by TiC and ZrC Particles

Ablation-resistance behavior of sweat cooling TiB2-Cu matrix interpenetrating phase composites

Combustion Synthesis of TiB-Ti Cermets

Effect of Carbide Particles on the Ablation Properties of Tungsten Composites

Ablation behaviour of titanium diboride-copper-nickle FGM

Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites

Ablation behavior of high-entropy carbides ceramics (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C upon exposition to an oxyacetylene torch at 2000 °C

Preparation, Mechanical and Ablation Properties of a C/C-TaB2-SiC Composite

Ablation mechanism of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC composite during plasma ablation above 2000 °C

The influences of cu content on the self-propagating high temperature synthesized TiC-TiB2 composites

Self‐defending mechanism of C/TaC‒SiC composites under 2100°C cyclic ablation environment

Thermal shock behavior of co-continuous TiCx-Cu cermets in air and anaerobic environment

Ablation behavior and mechanisms of 3D C<sub>f</sub>/ZrB<sub>2</sub>-SiC composite applied in long-term temperature up to 2400 C