Abstract:The severe deformation and temperature paths in the stir zone, also called weld nugget, of friction stir welded joints result, at very local levels, in significant microstructural variations, such as major differences in grain size or precipitation. One of the most common features of friction stir welds is the presence of successive material layers, known as onion rings; however, little data is available on the mechanical properties of the different regions of the weld nugget, and particularly within the onion ring bands. Such information becomes very important for the integrity of large size friction stir welded structures. In the present study, a comprehensive characterization of onion rings produced during friction stir welding of a 6082-aluminum alloy was carried out. Advanced techniques such as in-situ SEM nanoindentation, EBSD, and high-resolution EDS were used to validate and compare the characteristics of the different bands in the onion rings. The analyses consisted of quantifying variations in grain size, precipitate composition and distribution, crystallographic orientations, and mechanical properties in each band. Furthermore, the tensile strengths of different regions of the weld nugget were evaluated using shear punch testing and correlated with those for the onion ring region in order to determine the impact of the presence of onion rings on weld nugget mechanical properties. The main difference between the alternate bands in the onion ring was found to be due to the difference in their grain size, misorientation, and precipitate content. It was also observed that the bands originate from the base metal and stir zone successively due to the nature of the stirring process, which pulls BM into SZ. Comparison of the shear punch testing results in different regions of the nugget revealed that, in spite of having local differences in the hardness of alternate bands in the onion ring, the presence of onion rings has no significant impact on the deterioration of the mechanical properties of the weld nugget.

Development of a Fine-Grained Microstructure and the Properties of a Nugget Zone in Friction Stir Welded Pure Copper

Effect of Heat Input Conditions on Microstructure and Mechanical Properties of Friction-Stir-Welded Pure Copper

Effect of welding speed on microstructure and mechanical properties of friction stir welded copper

Microstructural Characterisation and Mechanical Properties of Friction Stir Welded Joints of Aluminium Alloy to Copper

The Influence of Thermal Cycle on the Grain Structure of Friction-Stir-Welded Pure Copper Joint

Effect of Tool Rotation Rate on Microstructure and Mechanical Properties of Friction Stir Welded Copper

Development of grain structure during friction-stir welding of Cu–30Zn brass

Partial Recrystallization in the Nugget Zone of Friction Stir Welded Dual-Phase Cu–Zn Alloy

Effect of Tool Speed on Microstructure Evolution and Mechanical Properties of Friction Stir Welded Joints of Al-Mg-Si Alloy with High Cu Content

Microstructural Evolution and Mechanical Properties of Friction Stir Welded Mg–Zn–Y–Zr Alloy

Microstructural Evolution and Mechanical Properties of Dissimilar Al–Cu Joints Produced by Friction Stir Welding

Inhomogeneity of Microstructure Evolution in Stir Zone of 2195al Thick-Plate FSW Joints

Effect of microstructural evolution on mechanical properties of friction stir welded ZK60 alloy

Effect of Rotation Speed on the Microstructure and Mechanical Properties of Dissimilar Friction Stir-Welded Copper/brass Metals

Assessing Microstructure-Local Mechanical Properties in Friction Stir Welded 6082-T6 Aluminum Alloy

Microstructure Evolution and Mechanical Properties of Friction Stir Welded Al–Cu–Li Alloy

Study on the influence of tool rotational speeds/welding traverse speeds on the quality and surface formation of 6mm copper friction stir welding

Microstructure Evolution and Mechanical Properties of Friction Stir Spot Welded Dissimilar Aluminum-Copper Joint

Atypical Grain Coarsening of Friction Stir Welded AA6082-T6: Characterization and Modeling

Effect of microstructure heterogeneity on the mechanical properties of friction stir welded reduced activation ferritic/martensitic steel

Effect of rotation speed on microstructure and mechanical properties of bobbin tool friction stir welded T2 Copper