Abstract:The severe deformation and temperature paths in the stir zone, also called weld nugget, of friction stir welded joints result, at very local levels, in significant microstructural variations, such as major differences in grain size or precipitation. One of the most common features of friction stir welds is the presence of successive material layers, known as onion rings; however, little data is available on the mechanical properties of the different regions of the weld nugget, and particularly within the onion ring bands. Such information becomes very important for the integrity of large size friction stir welded structures. In the present study, a comprehensive characterization of onion rings produced during friction stir welding of a 6082-aluminum alloy was carried out. Advanced techniques such as in-situ SEM nanoindentation, EBSD, and high-resolution EDS were used to validate and compare the characteristics of the different bands in the onion rings. The analyses consisted of quantifying variations in grain size, precipitate composition and distribution, crystallographic orientations, and mechanical properties in each band. Furthermore, the tensile strengths of different regions of the weld nugget were evaluated using shear punch testing and correlated with those for the onion ring region in order to determine the impact of the presence of onion rings on weld nugget mechanical properties. The main difference between the alternate bands in the onion ring was found to be due to the difference in their grain size, misorientation, and precipitate content. It was also observed that the bands originate from the base metal and stir zone successively due to the nature of the stirring process, which pulls BM into SZ. Comparison of the shear punch testing results in different regions of the nugget revealed that, in spite of having local differences in the hardness of alternate bands in the onion ring, the presence of onion rings has no significant impact on the deterioration of the mechanical properties of the weld nugget.

Atypical Grain Coarsening of Friction Stir Welded AA6082-T6: Characterization and Modeling

The Mechanism of Grain Coarsening in Friction-Stir-Welded AA5083 after Heat Treatment

Abnormal Particle-Coarsening Phenomena in Friction Stir Repair Welding of a 2219-T6 Al Alloy: Formation Mechanisms

Inhibition of Abnormal Grain Growth in Stir Zone Via In-Situ Intermetallic Particle Formation During Friction Stir Welding of AA6061

Grain Structure and Texture Evolution in the Bottom Zone of Dissimilar Friction-Stir-Welded AA2024-T351 and AA7075-T651 Joints

Microstructure and abnormal mechanical properties under the coupling effect of strain and temperature for friction-stir-welded joints of Al-Mg-Si alloy

Forming Process Analysis of Equiaxed Grain in Weld Nugget Zone During Friction-Stir Welding of Aluminum Alloy

Correlation Between Microstructures and Mechanical Properties of High-Speed Friction Stir Welded Aluminum Hollow Extrusions Subjected to Axial Forces

Experimental and numerical studies of relationship between microstructures and mechanical properties in friction stir welding under water

Retention of Fine Grained Microstructure of Equal Channel Angular Pressed Aluminum Alloy 1050 by Friction Stir Welding

Inhomogeneity of Microstructure Evolution in Stir Zone of 2195al Thick-Plate FSW Joints

Multi-scale modelling of the microstructure evolution during friction stir welding of 2195 Al–Li alloy

Microstructure Evolution and Mechanical Properties of Friction Stir Welded Al–Cu–Li Alloy

The Evolution of Abnormal Grains during the Heating Stage of a Post-Weld Solution Treatment in a Friction-Stir-Welded 2519 Aluminium Alloy

Crystal Plasticity Modeling for Mechanical Property Prediction of AA2195-T6 Friction Stir Welded Joints

The investigation of abnormal particle-coarsening phenomena in friction stir repair weld of 2219-T6 aluminum alloy

Grain Characteristic and Texture Evolution in Friction Stir Welds of Nanostructured Oxide Dispersion Strengthened Ferritic Steel

Assessing Microstructure-Local Mechanical Properties in Friction Stir Welded 6082-T6 Aluminum Alloy

Thermomechanical Behavior and Microstructural Characteristics of 7055 Aluminum Alloy During Friction Stirring Welding

Microstructural evolution of 6063 aluminum during friction-stir welding

Evaluation of Dynamic Recrystallization Phenomenon in Friction Stir Welding of AA5083-O by Cellular Automata Finite Element Approach