Abstract:In order to represent the mechanical response laws of high-modulus asphalt pavement (HMAP) faithfully and objectively, the viscoelasticity of high-modulus asphalt mixture (HMAM) was considered, and the viscoelastic mechanical responses were calculated systematically based on moving load by numerical simulations. The performances of the HMAP in resistance to the deformation and the cracking at the bottom layer were compared with the ordinary asphalt pavement. Firstly, Lubao and Honeywell 7686 (H7686) were selected as the high modulus modifiers. The laboratory investigations of Asphalt mix-70 penetration, Asphalt mix-SBS (styrene-butadiene-styrene), HMAM-Lubao and HMAM-H7686 were carried out by dynamic modulus tests and wheel tracking tests. The conventional performances related to the purpose of using the HMAM were indicated. The master curves of the storage moduli were obtained and the viscoelastic parameters were fitted based on viscoelastic theories. Secondly, 3D pavement models based on moving loads for the viscoelastic structures were built using the non-linear finite element software ABAQUS. The wheel path was discretized in time and space to apply the Haversine wave load, and then the mechanical responses of four kinds of asphalt pavement were calculated. Finally, the sensitivity analysis was carried out. The results showed that the addition of the high modulus modifiers can improve the resistance to high-temperature rutting of the pavements. Except for the tensile strain and stress at the bottom of the underlayer, other responses decreased with the increases of the dynamic moduli and the change laws of the tensile strain and stress were affected by the range of the dynamic modulus. The tensile stress at the bottom of the asphalt layer would be too large if the modulus of the layer were too large, and a larger tensile strain would result. Therefore, the range of the modulus must be restricted to avoid the cracking due to excessive tension when using the HMAM. The resistance of the HMAP to deformation was better and the HMAP was less sensitive to load changes and could better withstand the adverse effects inflicted by heavy loads.

Verification of Hirsch Model in Predicting Dynamic Moduli of Asphalt Mixtures

Prediction of Dynamic Shear Modulus of Fine Aggregate Matrix Using Discrete Element Method and Modified Hirsch Model

Rheological Behavior of High Modulus Asphalt Binder and Its Indication for Fracture Performances

Viscoelastic Mechanical Responses of HMAP under Moving Load.

A New Dynamic Modulus Predictive Model for Asphalt Mixtures Based on the Law of Mixtures

Modification of the Hirsch Dynamic Modulus Prediction Model for Asphalt Mixtures

Dynamic Modulus Test of Asphalt Mixture and Prediction Model

Assessing dynamic modulus properties for typical asphalt mixtures in Jiangsu

Stress-dependent mechanical behavior of asphalt mixtures

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

Predicting Dynamic Shear Modulus of Asphalt Mastics Using Discretized-Element Simulation and Reinforcement Mechanisms

Relating Field Moduli of Asphalt Mixture Layer under Vehicular Loading and Its Dynamic Moduli under Laboratory Loading

Dynamic Modulus of Asphalt Mixture Based on Indirect Tensile Test Mode

Prediction Model of Shear Deformation of Asphalt Mixture Pavement

Investigation of Dynamic Viscoelastic Characteristics of Permeable Asphalt

Effects of Using Different Dynamic Moduli on Predicted Asphalt Pavement Responses in Mechanistic Pavement Design

Dynamic viscoelastic properties of modified asphalt and mixture based on DSR

Modified Two-Phase Micromechanical Model and Generalized Self-Consistent Model for Predicting Dynamic Modulus of Asphalt Concrete

Analysis of Pavement Responses Based on Dynamic Modulus

Determination and Analysis of Dynamic Modulus of Asphalt Mixture and Its Master Curve

Estimating Tensile and Compressive Moduli of Asphalt Mixture from Indirect Tensile and Four-Point Bending Tests