Abstract:This study aims to provide a new perspective into the consideration of filler distribution characteristic in micromechanical modeling of asphalt mastic through combining fractal microstructure. To do this, three viscoelastic micromechanical models were improved by the preliminarily combination between micro -mechanical equivalence and fractal statistic principles. Particle size distribution (PSD) of filler was tested by a laser particle size analyzer. Asphalt mastics with different filler concentrations were fabricated. Dynamic shear moduli of asphalt and asphalt mastics was tested by a dynamic shear rheometer. The PSD of the circles inter-cepted by the plane and dimensionless area of the intercepted asphalt matrix were analyzed. The dynamic shear modulus ratio of asphalt mastic to binder were calculated based on the improved models. The effects of various parameters on the distribution of the ratio were investigated. Results show that the shifted R-R distribution function is capable of capturing the PSD of filler. The dimensionless area increases with increasing dimensionless diameter, but decreases with increasing filler volume fraction. The shear modulus ratio shows a three-stage reduction trend with dimensionless diameter, replying that the shear modulus of asphalt mastic appears as a random distribution in space. Meanwhile, the spatial distribution is influenced by filler volume fraction and thus there has difference between the stiffening effects of filler on various local regions in asphalt mastic. Poisson's ratio of binder plays an enhanced role in the stiffening effect of filler, which is affected by the spatial locations within asphalt mastic. Modulus and Poisson's ratio of limestone filler and modulus of binder have little effect on the distribution of the shear modulus ratio. The combination of micromechanical modeling and fractal charac-teristic is capable of determining the spatial distribution characteristic of effective properties for asphalt mastic. The local homogenization of asphalt mastic in terms of the modulus and its influence on properties of asphalt mixture should be focused on and conducted in future.

Predicting Dynamic Shear Modulus of Asphalt Mastics Using Discretized-Element Simulation and Reinforcement Mechanisms

Prediction of Dynamic Shear Modulus of Fine Aggregate Matrix Using Discrete Element Method and Modified Hirsch Model

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

Micromechanics Modeling of Viscoelastic Asphalt-Filler Composite System with and Without Fatigue Cracks

Micromechanics Prediction of Dynamic Modulus for Asphalt Mastic Considering Filler Distribution Characteristic: A New Perspective

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

A Comparison of Two-Dimensional and Three-Dimensional Micromechanical Discrete Element Modeling of the Splitting Tests for Asphalt Mixtures

A New Dynamic Modulus Predictive Model for Asphalt Mixtures Based on the Law of Mixtures

Effects of Bitumen Origins and Filler Types on the Micromechanics Prediction of Complex Modulus of Asphalt Mastics Considering Interparticle Interactions

A Micromechanical Based Three-Dimensional DEM Approach to Characterize the Complex Modulus of Asphalt Mixtures

Predicting the Dielectric Properties Based on Micromechanical Modeling for Asphalt Mastics

Prediction of dynamic modulus of asphalt mixture using micromechanical method with radial distribution functions

Modified Two-Phase Micromechanical Model and Generalized Self-Consistent Model for Predicting Dynamic Modulus of Asphalt Concrete

Mechanical Response of Asphalt Surfaces under Moving Traffic Loads Using 3D Discrete Element Method

Three-Dimensional Micromechanical Complex-Modulus Prediction of Asphalt Concrete Considering the Aggregate Interlocking Effect

Mesostructural Modeling of Dynamic Modulus and Phase Angle Master Curves of Rubber Modified Asphalt Mixture

Effect of Filler on Thermodynamic and Mechanical Behaviour of Asphalt Mastic: a MD Simulation Study

Microstructural Modeling of Rheological Mechanical Response for Asphalt Mixture Using an Image-Based Finite Element Approach

Micromechanical and microstructure analysis of asphalt concrete under triaxial load condition based on Discrete Element Method

Three-Dimensional Micromechanical Finite Element Analysis on Gauge Length Dependency of the Dynamic Modulus of Asphalt Mixtures