Abstract:The connection between the steel joint and aluminum alloy pipe is the weak part of the aluminum alloy drill pipe. Practically, the interference connection between the aluminum alloy rod and the steel joint is usually realized by thermal assembly. In this paper, the relationship between the cooling water flow rate, initial heating temperature and the thermal deformation of the steel joint in interference thermal assembly was studied and predicted. Firstly, the temperature data of each measuring point of the steel joint were obtained by a thermal assembly experiment. Based on the theory of thermoelasticity, the analytical solution of the thermal deformation of the steel joint was studied. The temperature function was fitted by the least square method, and the calculated value of radial thermal deformation of the section was finally obtained. Based on the BP neural network algorithm, the thermal deformation of steel joint section was predicted. Besides, a prediction model was established, which was about the relationship between cooling water flow rate, initial heating temperature and interference. The magnitude of interference fit of steel joint was predicted. The magnitude of the interference fit of the steel joint was predicted. A polynomial model, exponential model and Gaussian model were adopted to predict the sectional deformation so as to compare and analyze the predictive performance of a BP neural network, among which the polynomial model was used to predict the magnitude of the interference fit. Through a comparative analysis of the fitting residual (RE) and sum of squares of the error (SSE), it can be known that a BP neural network has good prediction accuracy. The predicted results showed that the error of the prediction model increases with the increase of the heating temperature in the prediction model of the steel node interference and related factors. When the cooling water velocity hit 0.038 m/s, the prediction accuracy was the highest. The prediction error increases with the increase or decrease of the velocity. Especially when the velocity increases, the trend of error increasing became more obvious. The analysis shows that this method has better prediction accuracy.

Prediction of the Roundness Error of Tubing Coupling with Improved BP Neural Network Model

Prediction of NC tube bending process parameters based on artificial neural network

Rapid Prediction Method for Nonlinear Expansion Process of Medical Vascular Stent

Research on Mechanical Fault Prediction Based on Improved Neural Network

Bending deformation prediction in a welded square thin-walled aluminum alloy tube structure using an artificial neural network

Prediction of the Injection Quality Based on CAE and BP Neural Network

An ATPSO-BP Neural Network Modeling and Its Application in Mechanical Property Prediction

PREDICTION OF THE BEARING CAPACITY OF THIN-WALLED BOX WITH GEOMETRIC IMPERFECTION USING BP NEURAL NETWORK

Application of Bp Neural Network and Genetic Algorithm in Testing of Micro-Drill'S Rounded Corner

Predicting the Low‐cycle Fatigue Life of Ti‐6Al‐4V Alloy Using Backpropagation Neural Network Optimized by the Improved Dung Beetle Algorithm

Prediction Model of TIG Welding Seam Size Based on BP Neural Network Optimized by Genetic Algorithm

Accurate prediction of the extrusion forming bonding reliability for heterogeneous welded sheets based on GA-BP neural network

Cross-sectional Performance Prediction of Metal Tubes Bending with Tangential Variable Boosting Based on Parameters-Weight-adaptive CNN.

Deformation Prediction of Thin-Walled Parts Based on BP Neural Network

Prediction of the Deformation of Aluminum Alloy Drill Pipes in Thermal Assembly Based on a BP Neural Network

APPLICATION OF BP NEURAL NETWORK IN DATA FITTING OF SQUARE CONCRETE-FILLED STEEL TUBE UNDER AXIAL COMPRESSION

An integrated model of rolling force for extra-thick plate by combining theoretical model and neural network model

Reinforced Quantum-Behaved Particle Swarm-Optimized Neural Network for Cross-Sectional Distortion Prediction of Novel Variable-Diameter-die-formed Metal Bent Tubes.

A Hybrid Ga-Bp Algorithm For The Predictive Model Of Multi-Parameters Of Liquid-Solid Extrusion Process

Prediction Model of Wire Bonding Quality Based on Neural Network

Prediction of Transverse and Angular Distortions of Gas Tungsten Arc Bead-on-plate Welding Using Artificial Neural Network