Abstract:The combination of volumetric heating of the laser material by the absorbed pump radiation and surface cooling required for heat extraction leads to a no uniform temperature distribution in the rod. With the coactions of pump field and coolant, the temperature gradient is formed within laser working medium, and then the thermal effects including thermal lens, thermal stress birefringence, etc. They all seriously restrict the output characteristics of laser. The uniform temperature field distribution in laser working medium weakens the influences of thermal effects in laser. The thermal effect of Tm: YAG laser generated by laser-diode pumping the Tm: YAG crystal is analyzed. After considering the quasi three-level structure of the crystal and the distribution of transmission power in the cavity, a more actual temperature field in the crystal is obtained by revamping the heat conversion coefficient. The thermal effects mechanics were analyzed at first, and then the physical and mathematical thermal analysis models were established based on the theoretical knowledge of thermal effects in LD pumped Tm: YAG laser. The method can be applied to the laser thermal effect research of quasi three-level. The analysis and the result can be referred to the thermal effect research of the solid state laser end-pumped by the LD and the optimal design of resonant cavity.

Fractional Thermal Loading and Thermal Lensing in End-Pumped Tm, Ho : Ylf Lasers

Theoretical Analysis of Thermal-Lensing Effect in a High Power Exciplex Pumped Cs Vapor Laser.

Thermal Effects in High-Power Double Diode-End-Pumped Cs Vapor Lasers

Analysis of Thermal Effects in A Pulsed Laser Diode End Pumped Single-Ended Composite Tm:Yag Laser

Thermal Loading In Laser Diode End-Pumped Yb3+/Er3+ Codoped Phosphate Glass Laser

Thermal Lensing in an End-Pumped Yb:KGW Slab Laser with High Power Single Emitter Diodes.

Absorption efficiency analysis and optical resonator simulation of Ho:YLF laser pumped with Tm:fiber laser

A Modified Model for the LD Pumped 2μm Tm:YAG Laser: Thermal Behavior and Laser Performance

The Thermal Effect in Diode-End-Pumped Continuous-Wave 914-Nm Nd:Yvo4 Laser

Determination of Thermal Lensing and Dynamic Operating Point of Quasi-Concentric Laser Resonator with Line-Shaped End-Pumping Profile: the Influence of ${\rm TEM}_{00}$ Beam Size

Spectra- and Temperature-Dependent Dynamics of Directly End-Pumped Holmium Lasers

High-Power, High-Energy Ho:Yag Oscillator Pumped by A Tm-Doped Fiber Laser

The Fractional Thermal Factor in LD-pumped Yb<sup>3&#x002b;</sup>/Er<sup>3&#x002b;</sup> Codoped Phosphate Glass

Energy Level Systems and Transitions of Ho:Luag Laser Resonantly Pumped by A Narrow Line-Width Tm Fiber Laser

Holmium Laser In-Band Pumped by A Thulium Laser in the Same Host of Yalo3

Thermal Effects Analysis of High-Power Slab Tm:YLF Laser with Dual-End-Pumped Based on COMSOL Multiphysics

Effects of Ho3+-Doping Concentration on the Performances of Resonantly Pumped Ho:Yag Ceramic Lasers

Tm:Fiber Laser In-Band Pumped Ho:Luag Laser with over 18 W Output at 2124.5 Nm

Study on Thermal Effects of LD End-Pumped High-Repetition-rate Nd:YAG Laser

Research of Quasi-Three-Level Thermal Effect of Diode-Pumped Tm: Yag Crystal

Q-Switched Operation of End-Pumped Yb : Yag Lasers with Non-Uniform Temperature Distribution