Abstract:Suspension plasma spray is a promising technology for surface coatings. In this work, a comprehensive numerical model was developed to investigate the multiphase flow of suspension droplets and nanoparticles in direct-current (DC) plasma spraying. A three-dimensional computational model was developed to describe the plasma jet flow fields coupled with the axial injection of suspension droplets in which the zirconia micro- and nanoparticles were dispersed. The suspension droplets were tracked using Lagrangian coordinates, considering particle heating, melting, and evaporation. After evaporation of the solvent surrounding the particle, the nanoparticles were discharged into the plasma flow. In addition to the viscous force exerted by the flow on the micrometer-sized particles, the Brownian force and the Saffman lift force were taken into account. The effects of the noncontinuum on particle momentum transfer and evaporation on heat transfer were also considered. The numerical predictions of gas flow temperature were compared with experimental data and numerical data obtained with a different computational fluid dynamics code. The agreement was reasonable. The trajectories, velocity, and temperature of nanoparticles were calculated, and compared with those of microparticles. The results showed that the Brownian force plays a major role in acceleration and heating of nanoparticles. Compared with the conventional plasma spray process with micrometer-sized feedstock, the nanoparticles in suspension plasma spraying were found to have a wider spatial distribution and higher temperature. The effects of operating parameters, such as the power input to the plasma gas and plasma gas composition, on the gas velocity and temperature were investigated. The parameters that have a significant effect on the heat and momentum transfer to the particles injected in the plasma jet were identified.

Melting and oxidation behavior of in-flight particles in plasma spray process

Melting/Oxidation Behavior of In-Flight Particles in Plasma Spray Processes

Melting, Oxidation, Evaporation of Particle In-Flight in Plasma Spray Processes

Melting Behavior of In-Flight Particles and Its Effects on Splat Morphology in Plasma Spraying

The Analysis of Melting and Refining Process for In-Flight Particles in Supersonic Plasma Spraying

Three-dimensional simulation of air entrainment in plasma jet and particle oxidation

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

Numerical Modeling of In-Flight Molten Metal Droplet Dynamics and Particle Oxidation in Atmospheric Plasma Spraying

Research on In-Flight Property of Particles in Plasma Spray Forming

Modeling of non-Newtonian suspension plasma spraying in an inductively coupled plasma torch

Particle characterization and splat formation of plasma sprayed zirconia

Analysis of Melting and Refining Process of Supersonic Plasma Spraying Particles

Simulation of Effervescent Atomization and Nanoparticle Characteristics in Radio Frequency Suspension Plasma Spray

An Investigation of Particle Injection and Resulting In-Flight Particle Behavior During Air Plasma Spraying

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

Numerical Analysis of In-Flight Behavior of Particle in Plasma Spray Forming

Experimental and Numerical Studies of Plasma Forming Process Parameters Effect on Optimum Particle Impact Locations

A Critical Assessment of Particle Temperature Distributions During Plasma Spraying: Numerical Studies for YSZ

Numerical Study of Particle In-Flight Characteristics in a RF Induction Plasma Spray

In-Flight Behaviors of Zro2 Particle in Plasma Spraying

In-Flight Particle Behavior in Internal Powder Injection Supersonic Plasma Spray