Abstract:CeO2 supported V2O5 catalysts were prepared by the wetness impregnation technique and their surface structures were characterized by O2 chemisorption, X-ray diffraction (XRD) and Raman spectroscopy (LRS). The surface acidity and basicity were measured by using microcalorimetry and infrared spectroscopy (FTIR) for the adsorption of NH3 and CO2. Temperature programmed reduction (TPR) was employed for the redox properties. In particular, isopropanol probe reactions with and without the presence of O2 were employed to provide the additional information about the surface acidity and redox properties of the catalysts. Variation of loading of V2O5 and calcination temperature brought about the changes of surface structures of dispersed vanadium species, and hence the surface acidic and redox properties. Structural characterizations indicated that V2O5 can be well dispersed on the surface of CeO2. The monolayer dispersion capacity was found to be about 8V/nm2, corresponding to about 10% V2O5 by weight in a V2O5/CeO2 sample with the surface area of 80m2/g. Vanadium species in the catalysts (673K calcined) with loading lower than 10% were highly dispersed and exhibited strong surface acidity and redox ability, while higher loading resulted in the formation of significant amount of surface crystalline V2O5, which showed fairly strong surface acidity and significantly weakened redox ability. Calcination of a 10% V2O5/CeO2 at 873K resulted in the formation of mainly CeVO4 on the surface, which showed low surface acidity and redox ability. The probe reaction seemed to suggest that the calcination at higher temperature might cause the decrease of surface acidity more than redox ability. Thus, the 10% V2O5/CeO2 catalyst calcined at 873K exhibited much higher selectivity to benzaldehyde as compared to other V2O5/CeO2 catalysts studied in this work, although its activity for the conversion of toluene was relatively low.

Surface Acidic and Redox Properties of V-Zr-O Catalysts for the Selective Oxidation of Toluene to Benzaldehyde

Synergistic Effect Between Cu–Cr Bimetallic Oxides Supported on G-C3n4 for the Selective Oxidation of Toluene to Benzaldehyde

Effect of acidic and red-ox sites over modified ZSM-5 surface on selectivity in oxidation of toluene

Surface acidic and redox properties of V-Ag-Ni-O catalysts for the selective oxidation of toluene to benzaldehyde

Enhanced catalytic oxidation of toluene over manganese-based multi-metal oxides synthesized by ozone driving redox reaction

Investigation of Cu-Mn Catalytic Ozonation of Toluene: Crystal Phase, Intermediates and Mechanism

Highly Selective Oxidation of Methanol to Dimethoxymethane over So42-/V2o5-Zro2

Multicomponent Co-Zr-P-W-O Immobilized Zeolites Toward Solvent-Free Oxidation of Toluene to Benzaldehyde

Selective Oxidation of Toluene Using Surface-Modified Vanadium Oxide Nanobelts

Surface Acidic and Redox Properties of V–Ag–O/TiO 2 Catalysts for the Selective Oxidation of Toluene to Benzaldehyde

Selective solvent-free oxidation of toluene to benzaldehyde over zeolite supported iron

Engineering Surface Properties of CuO/Ce0.6Zr0.4O2 Catalysts for Efficient Low-Temperature Toluene Oxidation

Catalytic Oxidation Mechanism of Toluene on the Ce0.875Zr0.125O2 (110) Surface

SO42––Fe–V/ZrO2 Composite for Selective Oxidation of Styrene to Benzaldehyde in H2O2 Aqueous Solution

Characterization of Acidic and Redox Properties of Ce–Mo–O Catalysts for the Selective Oxidation of Toluene

Advances in Development of Vapor Phase Selective Oxidation of Toluene to Benzaldehyde

Mixed Oxides FeVOx for Selective Oxidation of Octanol to Octanal under Solvent‐free Condition

Facile hydrothermal synthesis of VO2 nanosheets as robust catalysts for liquid-phase selective oxidation of benzyl alcohol under atmospheric O2

Structural, Redox and Acid–base Properties of V2O5/CeO2 Catalysts

Highly efficient selective oxidation of toluene to benzaldehyde over Cu-V oxides supported on amorphous SiO2

Partial Oxidation of Toluene over Ultrafine Mixed Mo-Based Oxide Particles