Abstract:The development of solid oxide fuel cells (SOFCs) faces impediments in terms of challenges associated with oxygen reduction activity and CO2 durability. Therefore, a series of novel composite cathode materials, consisting of NdBa0.5Sr0.5Co2O5+δ (NBSC) and Gd0.1Ce0.9O2-δ (GDC), were designed and synthesized using a one-pot strategy through a self-assembly process. The incorporation of GDC leads to a significant increase in the number of active sites. Furthermore, it alters the anisotropic transport properties of oxygen ions within layered double perovskite materials, consequently creating a three-dimensional conduit for O2- transportation. Simultaneously, the in-situ formation of closely intertwined heterogeneous interfaces between NBSC and GDC particles can facilitate the charge transfer processes and oxygen ion transport, thereby improving the kinetics of the oxygen reduction reaction (ORR). The NBSC-10GDC cathode, prepared through the one-pot method, exhibits reduced polarization resistances and enhanced CO2 tolerance in comparison to the mechanically mixed cathode. At 750 °C, the one-pot NBSC-10GDC exhibits a low area-specific resistance (ASR) of 0.029 Ω cm2, which is 69.8% lower than the ASR of single-phase NBSC and 42.0% lower than mechanically mixed NBSC-10GDC. Additionally, the one-pot NBSC-10GDC demonstrates a remarkable maximum power density (MPD) of 1.36 W cm-2 at 750 °C. These findings highlight the considerable potential of the one-pot NBSC-10GDC as a promising material for SOFC cathode.

Nanosized Ce0.8Sm0.2O1.9 infiltrated GdBaCo2O5+δ cathodes for intermediate-temperature solid oxide fuel cells

Significantly Enhanced Performance of the GdBaCo2O5+δ Cathodes with Active Ce0.8Sm0.2O1.9 Nanoparticles

Enhanced performance of the GdBaCo2O5+δ cathode with active Ce0.8Sm0.2O1.9 nanoparticles

Fabrication of Gd0. 8 Sr0. 2 CoO3-Sm0.2 Ce0. 8 O1.9 Cathodes for Intermediate Temperature Solid Oxide Fuel Cell

A high performance intermediate-temperature solid oxide fuel cell using impregnated La0.6Sr0.4CoO3−δ cathode

GdBaCo(2)O(5+delta)-Sm(0.2)Ce(0.8)O(1.9) Composite Cathodes for Intermediate Temperature SOFCs

GdBaCo2O5+δ–Sm0.2Ce0.8O1.9 Composite Cathodes for Intermediate Temperature SOFCs

Palladium and ceria infiltrated La0.8Sr0.2Co0.5Fe0.5O3-δ cathodes of solid oxide fuel cells

Enhanced Electrochemical Performance of Solution Impregnated La0.8Sr0.2Co0.8Ni0.2O3−δ Cathode for Intermediate Temperature Solid Oxide Fuel Cells

CO2-stable Alkaline-earth-free Solid Oxide Fuel Cells with Ni0.7Co0.3O-Ce0.8Sm0.2O1.9 Composite Cathodes

In situ self-assembled NdBa0.5Sr0.5Co2O5+δ/Gd0.1Ce0.9O2-δ hetero-interfaces enable enhanced electrochemical activity and CO2 durability for solid oxide fuel cells

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Nanosized Ceria Modified GdBaCo2O5+δ Cathode for IT-SOFC

Low-temperature co-sintering of co-ionic conducting solid oxide fuel cells based on Ce 0.8 Sm 0.2 O 1.9 -BaCe 0.8 Sm 0.2 O 2.9 composite electrolyte

Cerium and Niobium Doped SrCoO3−δ As a Potential Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Characterization of GdBaCo2O5+δ cathode for IT-SOFCs

Performance Evaluation of an Anode-Supported Solid Oxide Fuel Cell with Ce0.8Sm0.2O1.9 Impregnated GdBaCo2O5+δ Cathode

Cuco2o4-Gd0.1ce0.9o1.95 As A Potential Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells

Enhanced Performance of La<sub>0.8</sub>Sr<sub>0.2</sub>FeO<sub>3-</sub>-Gd<sub>0.2</sub>Ce<sub >0.8</sub>O<sub>2-</sub> Cathode for Solid Oxide Fuel Cells by Surface Modification with BaCO<sub>3</sub> Nanoparticles

Performances of Gd0.8Sr0.2CoO3 Powders for IT-SOFC Cathodes Prepared by Glycine-Nitrate Process

Performance of La0.5Sr0.5Fe0.9Mo0.1O3 − δ–Sm0.2Ce0.8O2 − δ composite cathode for CeO2- and LaGaO3-based solid oxide fuel cells