Abstract:Beam commissioning of the SuperKEKB collider began in 2016. The Beam Exorcism for A STable experiment II (BEAST II) project is particularly designed to measure the beam backgrounds around the interaction point of the SuperKEKB collider for the Belle II experiment. We develop a system using bismuth germanium oxide (BGO) crystals with optical fibers connecting to a multianode photomultiplier tube (MAPMT) and a field-programmable gate array (FPGA) embedded readout board for monitoring the real-time beam backgrounds in BEAST II. The overall radiation sensitivity of this system is estimated to be (2.20±0.26)×10−12 Gy/ADU (analog-to-digital unit) with the standard 10 m fibers for transmission and the MAPMT operating at 700 V. Our γ-ray irradiation study of the BGO system shows that the exposure of BGO crystals to 60Co γ-ray doses of 1 krad has led to immediate light output reductions of 25–40%, and the light outputs further drop by 30–45% after the crystals receive doses of 2–4 krad. Our findings agree with those of the previous studies on the radiation hard (RH) BGO crystals grown by the low thermal gradient Czochralski (LTG Cz) technology. The absolute dose from the BGO system is also consistent with the simulation, and is estimated to be about 1.18 times the equivalent dose. These results prove that the BGO system is able to monitor the background dose rate in real time under extreme high radiation conditions. This study concludes that the BGO system is reliable for the beam background study in BEAST II.

Online Measurement of the BEPC II Background Using RadFET Dosimeters

Design of the Online Integral Dose Monitor System for Besiii Emc

Measurement and study of the radiation background at interaction region of BEPCI

Development of fiber beam loss monitor based on Cerenkov principle

Study of the Features of 400nm IMPL RADFET Dosimeter

MEASUREMENTS OF RADIATION DOSE LEVEL AROUND 3W1 BEAMLINE OF BEPC

Measurement for Radiation Background of BES Detector

Beam energy online measurement of BEPCII LINAC

Design of Readout Electronics for BESIII Crystal Calorimeter Integrated Dose Monitoring System

Calibration and irradiation study of the BGO background monitor for the BEAST II experiment

Study on 10Be measurement using 0.5 MV AMS dacility

Study on 10 Be Measurement Using 0.5 MV AMS Facility

Further Improvement for 10be Measurement on an Upgraded Compact AMS Radiocarbon Facility

Design of readout electronics for BESIII online dose rate monitoring and protection system

Study on ~(10)Be Measurement Using 0.5MV AMS Facility

Real Time Bunch-by-Bunch Luminosity Monitor for BEPCII

A Simple Way to Upgrade a Compact Radiocarbon AMS Facility for 10Be

Application of Particle Track System BEPC Test Beam

Test of High Time Resolution Mrpc with Different Readout Modes for the Besiii Upgrade

A Simple Way to Upgrade a Compact Radiocarbon AMS Facility for <sup>10</sup>Be

Front-end Electronics of Fast Luminosity Monitor System for BEPCⅡ