Abstract:Abstract Copper antimony sulfide (Cu-Sb-S) has recently been proposed as an attractive alternative photovoltaic material due to the earth-abundant and non-toxic nature of the elements, high absorption coefficients and band gaps commensurate with efficient harvesting of solar photonic flux across multiple phases of Cu-Sb-S. These materials are therefore highly desirable and sustainable and scalable deposition techniques to produce them are of interest. In this paper, we demonstrate two facile, low-temperature and inexpensive techniques (solventless thermolysis and aerosol-assisted chemical vapor deposition (AACVD)) for the preparation of binary digenite (Cu 1.8 S), chalcocite (Cu 2 S) and stibnite (Sb 2 S 3 ) and several phases of ternary copper-antimony-sulfide (Cu 2x Sb 2(1−x) S y , where 0 ≤ x ≤ 1). It was found that by utilising these different techniques and varying the ratio of Cu:Sb, pure phases of ternary chalcostibite (CuSbS 2 ), fematinite (Cu 3 SbS 4 ) and tetrahedrite (Cu 12 Sb 4 S 13 ) can be achieved. Two single-source precursors were investigated for this purpose, namely the diethyldithiocarbamate (DTC) complexes of copper and antimony Cu(DTC) 2 and Sb(DTC) 3 . These were decomposed both individually (to produce binary materials) and combined (to produce ternary materials) at different ratios. From the solventless thermolysis and AACVD methods, either particulate or thin film material was formed, respectively. These materials were then characterised by powder XRD, SEM, EDX and Raman spectroscopies to determine the crystalline phase, material morphology and uniformity of elemental composition. This analysis demonstrated that as the Cu-content increases, the phase of the ternary material changes from chalcostibite (CuSbS 2 ) and fematinite (Cu 3 SbS 4 ) at a low Cu:Sb ratio to tetrahedrite (Cu 12 Sb 4 S 13 ) at a high Cu:Sb ratio.

Solvo-displacement Route to Ternary Compounds Ag–M–S (m=ga, Cu or Hg)

Mild solvothermal syntheses and crystal structures of two quaternary hetero-transition metal sulfides RbAg5HgS4 and CsAgHgS2

Solvothermal Synthesis Route to Ternary Chalcogenides Cu(Ag)–Pd–S

A Novel One-Step Solvothermal Route to Nanocrystalline CuSbS2 and Ag3SbS3

Synthesis of Ternary Compounds Cu_(0.8)Ag_(1.2)S and Cu_(0.5)Ag_(1.5)Se with High Crystallinity at Room Temperature and Characterization with XPS

Preparation of ternary I-IV-VI nanocrystallines via a mild solution route

Phase Equilibria in the Ag2S–Sb2S3–SnS2 System and the Novel Quaternary Chalcogenide Ag11Sb3SnS12

Preparation of (zn,hg)s Crystallite and Thin Film by Solvothermal Synthesis

Solvothermal Reaction Route to Nanocrystalline Semiconductors AgMS2 (m=ga, In)

Preparation and Characterization of Ternary Cu–Sn–E (E=S, Se) Semiconductor Nanocrystallites Via a Solvothermal Element Reaction Route

Polyol mediated synthesis of nanocrystalline M3SbS3 ( M = Ag, Cu)

Syntheses And Structures Of Heterobimetallic Complexes Derived From [Ga(Edt)(2)](-) As A Metalloligand (Edt = -Sc2h4s-): Potential Precursors For Ternary Materials Mgas2 (M = Cu Or Ag)

Phase Equilibria of the Sn-Sb-Ag Ternary System (I): Experimental

Synthesis and Characterization of Ternary Chalcogenides Ag8SnE6 (E=S, Se)

Ag–Sb/Cu interfacial reactions and Ag–Cu–Sb phase equilibria

Experimental Measurement on the Phase Equilibria of the Mg–Ag–Cu Ternary System at 350 and 400 °C

A novel morphology controllable preparation method to HgS

Assembly Of Novel Organic-Decorated Quaternary Tm-Hg-Sb-Q Compounds (Tm = Mn, Fe, Co; Q = S, Se) By The Combination Of Three Types Of Metal Coordination Geometries

A simple solvothermal route to copper chalcogenides

Synthesis of ternary copper antimony sulfide via solventless thermolysis or aerosol assisted chemical vapour deposition using metal dithiocarbamates

The synthesis and characterization of nanocrystalline Cu- and Ag-based multinary sulfide semiconductors