Abstract:The present paper attempts to introduce a new technology for sewage sludge solidification by taking cement,PFA and cinder as the solidifying agent. The said technology has been developed through compressive analysis of the strength of solidified sludge and observation of the leaching property of heavy metals extracted from it,and then determining its micro-structural characteristics with XRD and SEM. According to our experimental process,once the investigative test and the orthogonal experiment and the single-factor analysis were done,it would be possible to prepare our optimal solidification prescription. In the experiments,we have used cement,PFA and cinder as binding substance,added with 0.07 kg/kg,0.02 kg/kg and 0.06 kg/kg,respectively. Results of our experiments have shown that the strength of the solidified sludge with cement,PFA and cinder proves to be considerably higher than the standard one for landfill,for cement,PFA,cinder,and plaster can help to solidify the sludge with better compressed strength. After curing 7 d,the compressed strength of the sludge mixture can reach 1.8 MPa. Of all the factors that influence the solidifying process,water content is of greatest importance. However,it is an adverse factor to the sludge mixture. When the water content reaches 71.2%,the compressed strength may rise to 2.062 MPa after curing 7 d while the compressed strength may drop to 0.622 MPa after curing 7 d getting to 79.3%. In addition,it is also necessary to know that leaching of heavy metals would be less than the tolerable limits. Therefore,it can be concluded that the three decisive measures to solidify the sewage sludge with the above prescription can keep the physical and chemical stabilization of the sludge longer,for it is the solidification of sewage sludge that helps to immobilize the contaminants from the solidified products,which are supposed to be used in the landfill.

Experimental Study on Solidification of River Sediment Using Carbide Slag

Solidification of dewatered sewage sludge using bottom ash of MSWI as skeleton material

Experimental Research On Solidification Of Ningbo Soil With Its Different Initial Status

Study on the Property and Mechanism of Low Content Cement-Industrial Waste Residue Silt Solidification

Experimental Study on Solidifying Contaminated Sediment via Waste Incineration Fly Ash

Optimization of Proportions and Solidification Mechanism of All-Solid Waste Cementitious Materials Based on Circulating Fluidized Bed Fly Ash, Calcium Carbide Slag, and Red Mud

Utilization of siliceous–aluminous fly ash and cement for solidification of marine sediments

Study on the use of waste incineration fly ash for sediment solidification

Experiment and Mechanism Analysis on the Solidification of Saline Dredger Fill with Composite Slag Solidifying Agent: A Case Study in Caofeidian, China

Study on Modification and Mechanism of Construction Waste to Solidified Silt

Using Alkali-Activated Cementitious Materials to Solidify High Organic Matter Content Dredged Sludge as Roadbed Material

Experimental Study on Strength Development and Engineering Performance of Coal-Based Solid Waste Paste Filling Material

Experimental Study on Solidification/stabilization for Fly Ash from Waste Incineration

New Technology for Solidifying Sewage Sludge

Mechanical properties and solidification mechanism of coal gangue-granulated blast furnace slag geopolymer stabilized engineering slurry

Performance Optimization of Alkaline Multi-Industrial Waste-Based Cementitious Materials for Soil Solidification

Preparation of backfill materials by solidifying municipal solid waste incineration fly ash with slag-based cementitious materials

Study on the Performance and Solidification Mechanism of Multi-Source Solid-Waste-Based Soft Soil Solidification Materials

Stabilization of Fluidic Silty Sands with Cement and Steel Slag

Study on the solidification property and mechanism of soft soil based on the industrial waste residue

The cementitious properties of alkali-activated municipal solid waste incineration fly ash-phosphorus slag-secondary aluminum dross matrix composites and the mechanism of solidification of heavy metals