A Synergistic Method Using Ferrous Sulfate and Cementitious Materials to Solidify Landfilled Municipal Sludge
Hefu Pu,Xiao He,Ming Min,Chunwei Liu,Man Yuan,Jianfeng Cao
DOI: https://doi.org/10.1016/j.jece.2024.114023
IF: 7.7
2024-01-01
Journal of Environmental Chemical Engineering
Abstract:The filling of landfilled municipal sludge (LMS), which is typical of high water content and low strength, poses great challenges for the landfill expansion and its mechanical stability. This study proposed a synergistic method to treat the LMS using ferrous sulfate (FS)-conditioning and cementitious materials (e.g., lime, fly ash, and cement) solidification. A series of water content, unconfined compressive strength (UCS), pH, and toxicity leaching tests were conducted to evaluate the dewatering/solidification performance of this synergistic method. The results showed that this synergistic method was effective in LMS dewatering and solidification. For the LMS tested, the proposed optimum dosage was 7% FS, 4% lime, 5% fly ash, and 10% cement, which is a much lower usage than similar studies in the literature. At this dosage, the treated LMS after 28 days of curing exhibited water content of 57.8%, UCS of 279.1 kPa, pH value below 10.0, and no leaching toxicity, which satisfied the landfill disposal requirement by Chinese standard GB/T 23485-2009. Microscopic analyses (e.g., optical microscope, bound water measurement, scanning electron microscopy, and X-ray diffraction) revealed that FS-conditioning destroyed the colloidal agglomerate in the sludge and released the bound water to become free water; then, the cementitious materials reacted with the free water and generated cementation products (e.g., ettringite, and calcium silicate/aluminate hydrate), which significantly improved the sludge strength. The novelty of this work is that the proposed synergistic use of FS and cementitious materials, relative to the traditional method, is more effective in sludge dewatering and solidification and yet has a lower cost.