Abstract:This paper develops a one-dimensional simulation model of a thermoelectric module aiming at its characteristic exploration and output performance prediction. Almost all related effects are considered including Seebeck, Peltier, Thomson effects, the spatial- and temperature-dependent thermoelectric material properties, as well as the other irreversible factors. In order to ensure its high accuracy and computational efficiency, the differential equations built for components of non-linear physical properties, and analytical equations for the others of constant properties are jointly solved by numerical methods and implemented in MATLAB integrated development environment. A small deviation of 1.44% exists between its calculated output power and that by a previously reported three-dimensional model under a specific wide load range (0-250 Omega), validating its accuracy of this model. Besides, it indicates that both the proportions of heat leakage through the occupied air zone and its maximum output power to the input total heat flow have the same order of magnitude. A rising proportion for the former has to be paid attention in case of a higher temperature difference applied. The assumption of regarding its electrical contact resistance as an identical external resistance connected with the load in series is computationally proved to generate a negligible discrepancy in terms of TEM characteristics and its output performance. Furthermore, with respect to the impacts of TEM geometry, the pre-set fixed substrate area weakens the equivalence of regarding a thermoelectric module with larger cross-section area of thermoelectric legs as multiple identical modules with smaller leg areas connected in parallel. It accounts for the better linearity of rising output power by a long leg than that by a short leg as the leg area increases. A long thermoelectric leg means an increased induced electrical potential and inner resistance as well, thus leading to a single peak of the output power as the leg length increases. Finally, a thermoelectric geometric optimization approach abased on the Hill-climbing algorithm is introduced and first applied for the maximum output. Its accuracy and efficiency are validated and analyzed detailedly by supplying different variables as initial search point. All the methods and conclusions in this paper can assist thermoelectric generators' performance estimation and guide the geometric optimizations regarding their large-scale applications in the future.

Thermal Design and Management for Performance Optimization of Solar Thermoelectric Generator

Numerical Modeling and Optimization of the Segmented PbTe–BiTe-based Thermoelectric Leg

Numerical Modeling of the Performance of Thermoelectric Module with Polydimethylsiloxane Encapsulation

Modeling of Thermoelectric Generators with Effects of Side Surface Heat Convection and Temperature Dependence of Material Properties

Simulation and Optimization for System Integration of A Solar Thermoelectric Device

Validation of Discrete Numerical Model for Thermoelectric Generator Used in a Concentration Solar System

Comprehensive Modeling for Geometric Optimization of a Thermoelectric Generator Module

Optimized Thermoelectric Generation for Efficient Low-Medium Temperature Geothermal Energy Harvesting

A three-dimensional model for thermoelectric generator and the influence of Peltier effect on the performance and heat transfer

Design of A Concentration Solar Thermoelectric Generator

Optimal Design of a Segmented Thermoelectric Generator Based on Three-Dimensional Numerical Simulation and Multi-Objective Genetic Algorithm

Elucidating modeling aspects of thermoelectric generator

Effect of Material Properties of Heat Collector on Performance of Solar Thermoelectric System

Characteristics Analysis and Parametric Study of A Thermoelectric Generator by Considering Variable Material Properties and Heat Losses

Geometry Optimization Of Solar Thermoelectric Generator Under Different Operating Conditions Via Taguchi Method

Numerical analysis of thermoelectric power generation coupled with temperature-dependent material properties

Multi-Objective and Multi-Parameter Optimization of A Thermoelectric Generator Module

Investigation of thermal radiation effects on thermoelectric module performance by an improved model

High Performance Analysis and Optimization of Metal Halide Perovskite-Based Thermoelectric Generators for Sustainable Energy Harvesting

Numerical Simulations on the Temperature Gradient and Thermal Stress of a Thermoelectric Power Generator

Design of Bi2Te3-based thermoelectric generator in a widely applicable system