Abstract:The emulsification of heavy oil and water into a W/O emulsion would increase the viscosity of the W/O emulsion and reduce the mobility of heavy oil. As we know, addition of a viscosity reducer such as water-soluble surfactants could change the status of emulsion and improve the mobility of heavy oil. Although up to 90% viscosity reduction could be achieved in laboratory experiments, field improvement of the heavy oil recovery is not satisfactory with addition of a viscosity reducer. Actually, it is related to the difference of the mixing process of water-soluble viscosity reducer, water, and heavy oil between lab experiments and subsurface flow in the formation. The viscosity of heavy oil is significantly affected by the temperature and emulsification. As for the heavy oil sampled from Bohai Oilfield, its viscosity decreases by 95% when the temperature increases from 50 to 100 °C. At 50 °C, the viscosity of the W/O emulsion with 70% water content is up to 21.05 times that of the dehydrated heavy oil. In the emulsification process of the W/O emulsion, water molecules disperse into heavy oil and agglomerate together to form water droplets, and the number of water droplets increases when the water content is increased. When we add some amount of a water-soluble viscosity reducer to the W/O emulsion, the re-emulsification process or the way of addition of the water-soluble viscosity reducer has a great effect on the variation of the state and viscosity. When heavy oil is mixed with 30% content of water-soluble viscosity reducer solution (the reducer content is 1% of the emulsion), up to 98% reduction in the viscosity of heavy oil could be obtained. However, when the W/O emulsion with 30% water content is mixed with 1% water-soluble viscosity reducer, only 4% reduction in the viscosity of emulsion is observed. In the re-emulsification process of water in a W/O emulsion with addition of a reducer, pieces of heavy oil containing a number of water droplets are separated by the reducer solution and a W/O/W emulsion is generated. The pieces of heavy oil containing water droplets in such a W/O/W emulsion are much larger than the heavy oil droplets in an O/W emulsion. As the heavy oil in the reservoir is in the state of a W/O emulsion, a W/O/W emulsion with large heavy oil pieces containing water droplets will be generated when a water-soluble viscosity reducer solution is injected, and the resulted viscosity reduction is much lower than expected based on conventional lab experiments. Consequently, the experiments related to heavy oil with addition of a water-soluble viscosity reducer should be carried out with the W/O emulsion.

Effect of Steam on Extra Heavy Oil Recovery in Liaohe Oil Province

Influences of heavy oil thermal recovery on reservoir properties and countermeasures of Yulou oil bearing sets in Liaohe Basin in China

Theoretical Insight into the Effect of Steam Temperature on Heavy Oil/Steam Interface Behaviors Using Molecular Dynamics Simulation

Phase transition characteristics of heavy oil-viscosity reducer-water emulsion systems

Study on the influence of steam state on seepage, production, migration and deposition of offshore heavy oilfields

Mechanism of High Stability of Water-in-Oil Emulsions at High Temperature

Experimental Study on Water-in-Heavy-Oil Droplets Stability and Viscosity Variations in the Dilution Process of Water-in-Heavy-Oil Emulsions by Light Crude Oil

Experimental Study on the Synergistic Effect between Evaporation Weathering and Emulsification of Oil Spills

Experimental Investigation and Numerical Simulation of Dynamic Characteristics for Multithermal Fluid-Assisted SAGD in Extraheavy Oil Reservoir

Insights into enhanced oil recovery by thermochemical fluid flooding for ultra-heavy reservoirs: An experimental study

Study on Viscosity Reducer Flooding Technology for Deep Low Permeability Extra Heavy Oil Reservoirs

Experimental investigation of innovative superheated vapor extraction technique in heavy oil reservoirs: A two-dimensional visual analysis

Study on the Re-emulsification Process of Water in Heavy Oil Emulsion with Addition of Water-Soluble Viscosity Reducer Solution

The mechanisms of thermal solidification agent promoting steam diversion in heavy oil reservoirs

Investigation on the mechanism of heating effect influencing emulsifying ability of crude oil: Experimental and molecular dynamics simulation

Effect of water content and temperature on the rheological behavior of Caoqiao heavy oil

Mechanism investigation of steam flooding heavy oil by comprehensive molecular characterization

Study on Flow Characteristics of Flue Gas and Steam Co-Injection for Heavy Oil Recovery

An improved viscosity prediction model of extra heavy oil for high temperature and high pressure

Microvisual Investigation on Steam-Assisted Heavy Oil Extraction Behavior in Heterogeneous Porous Media

Evolution of the Properties and Composition of Heavy Oil by Injecting Dry Boiler Flue Gas