Research on molecular mechanism and prediction model of viscosity reduction of heavy oil by different types of gas
Yuexiang He,Ke Zhang,Weiyao Zhu,Ao Li,Debin Kong,Yu Zhang
DOI: https://doi.org/10.1080/15567036.2023.2224258
2023-06-19
Abstract:Dissolved gas flooding techniques are widely used in the later stages of heavy oil reservoir development. The role of foam oil in enhancing oil recovery from heavy oil solution gas has been researched. However, it is difficult to analyze the molecular mechanism of foam oil in the dissolved gas property theory and viscosity prediction model proposed by other scholars. In this study, the microscopic mechanism of the interaction between gas molecules and heavy oil molecules in foaming oil was analyzed by the variation of bubble point pressure and viscosity of different dissolved gases (CO 2 , N 2 , CH 4 ) in heavy oil samples. By comparing the variation of bubble point pressure of different dissolved gas samples, it was found that the interaction between gas molecules and heavy oil molecules seriously affected the solubility of gas in heavy oil at the same temperature and pressure. An increase in the solubility of the gas in the dissolved gas sample of heavy oil increases the bubble point pressure. The factors influencing the viscosity of heavy oil show that pressure has the least effect on the viscosity reduction of dissolved gas. The higher the concentration of dissolved gas, the more pronounced the viscosity reduction effect. However, the viscosity reduction performance of the dissolved gas in heavy oil became less effective as the temperature increased. Samples A, B, and C, at 15 mol% CO 2 concentration, the dissolved gas viscosity reduction effect decreases by 13.75%, 9.7%, and 12.2% when the temperature is increased by 40°C. In addition, samples A, B, and C, at 50°C and 10 mol% gas solubility, the viscosity reduction effect of CO 2 is 25.6%, 8.6%, and 19.7% lower than that of N 2 . Based on the influencing factors of viscosity reduction of heavy oil dissolved gas, this study modified the FJ viscosity prediction model and proposed a physically meaningful heavy oil viscosity prediction model. The model predicts the viscosity of heavy oil dissolved gas with over 90% accuracy (R 2 > 0.9) and has some applicability to mixed component gases.
energy & fuels,engineering, chemical