Abstract:In this study, ultra-fine grain Mg-3Zn-xCa-0.6Zr (x = 0, 0.6, 1.2, 1.8) alloy was obtained by a novel extrusion-shearing (ES) deformation process combining initial forward extrusion and subsequent equal channel angular extrusion (ECAP) shearing. The purpose of this paper is to improve the strength and plasticity of the alloy by ES process. The results of as-cast and homogenized alloy show that the ternary Ca2Mg6Zn3 phase with excellent thermal stability and refined grain size was formed in the alloy by adding Ca. In the ES process, the ternary phase was broken into ultra-fine particles pinned to the dynamic recrystallization (DRX) grain boundary, which introduced strong particle stimulated nucleation (PSN). Moreover, large number of MgZn phases in Ca-containing alloys were dynamically precipitated at DRX grain boundaries and within grains. In addition, in the early stage of the ES process, Ca2Mg6Zn3 phase promoted the accumulation of dislocations at the grain boundaries, and part of the grain boundary was transformed into low-angle grain boundaries (LAGBs) and high-angle grain boundaries (HAGBs). After the die corner shearing, the accumulated LAGBs gradually transformed into HAGBs due to continuous dynamic recrystallization (CDRX). Through the novel ES process and the addition of Ca element, the basal plane texture was significantly weakened and the DRX grain was refined. With the increase in Ca content, the strength and toughness of ES alloy increased obviously, and the yield asymmetry decreased gradually. When the content of Ca was 1.2 wt%, ES alloy exhibited the best combination of strength and toughness (UTS = 342 MPa, δ = 20.9%) due to nano-scale Ca2Mg6Zn3 phase, grain refinement and texture weakening. This property is of great significance for the development of magnesium alloys for biological applications.

Microstructure and Mechanical Properties of Mg–Zn–Ca Alloy Processed by Equal Channel Angular Pressing

Precipitation behaviors and mechanical properties of a solution-treated Mg-Gd-Nd-Zn-Zr alloy during equal-channel angular pressing process

Effect of the Equal Channel Angular Pressing on the Microstructure and Phase Composition of a 7xxx Series Al-Zn-Mg-Zr Alloy

Microstructural evolution and mechanical properties of AZ31 Mg alloy fabricated by a novel bifurcation-equal channel angular pressing

The microstructure and mechanical properties of Mg-Sn-based alloy processed by differential-thermal equal channel angular pressing

Revealing the effect of minor Ca and Sr additions on microstructure evolution and mechanical properties of Zn-0.6 Mg alloy during multi-pass equal channel angular pressing

Microstructural evolution of Al-Mg-Er-Zr alloy by equal channel angular extrusion at room temperature

Ductility enhancement in Mg–8.7Gd–4.18Y–0.42Zr magnesium alloy fabricated through extrusion and equal channel angular pressing (EX-ECAP)

Study on the Effect of the ECAP Deformation on the Organization and Properties of the Extruded Mg-Sn-Al Alloys

Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process

Mechanical Properties of Biomedical Ultrafine Grained Mg-3Sn-0.5Mn Alloy Processed by Equal-Channel Angular Pressing

Tailoring Mechanical Properties of Mg–Al–Zn–Sn–Mn Alloy by Multipass Equal Channel Angular Pressing

Effect of ECAP on Mechanical and Damping Properties of Mg-0.6%Zr Alloy

Influence of Texture on the Mechanical Properties of a Mg-6Al-1Zn-0.9Sn Alloy Processed by ECAP

Mechanical Properties and Microstructure of AZ31 Mg Alloy Processed by Two-Step Equal Channel Angular Extrusion

Reducing the Tension–compression Yield Asymmetry of Extruded Mg–Zn–Ca Alloy Via Equal Channel Angular Pressing

The Effects of ECAP, Mn and Ca Elements on the Microstructure and Corrosion Properties of Magnesium Alloys Were Investigated

Mechanical properties and structure of AZ61 magnesium alloy processed by equal channel angular pressing

Anisotropy investigation of an ECAP-processed Mg-Al-Ca-Mn alloy with synergistically enhanced mechanical properties and corrosion resistance

Evading Strength-Ductility Tradeoff in Mg Alloy via Uniform Microstructure and Unique Texture Modification Induced by Moderate Temperature ECAP

Study on equal channel angular pressing process of Mg–Zn–Y–Mn–Ti magnesium alloy enhanced by lamellar LPSO phase and spherical W phase