Abstract:A number of CO2 capture-enabled power generation technologies have been proposed to address the negative environmental impact of CO2 emission. One important barrier to adopting these technologies is the associated energy penalty. Chemical-looping Combustion (CLC) is an oxy-combustion technology that can significantly lower this penalty. It utilizes an oxygen carrier to transfer oxygen from air/oxidizing stream in an oxidation reactor to the fuel in a reduction reactor. Conventional CLC reactor designs employ two separate reactors, with metal/metal oxide particles circulating pneumatically in-between. One of the key limitations of these designs is the entropy generation due to reactor temperature difference, which lowers the cycle efficiency. Zhao et al. (Zhao et al., 2014; Zhao and Ghoniem, 2014) proposed a new CLC rotary reactor design, which overcomes this limitation. This reactor consists of a single rotating wheel with micro-channels designed to maintain thermal equilibrium between the fuel and air sides. This study uses three thermodynamic models of increasing fidelity to demonstrate that the internal thermal coupling in the rotary CLC reactor creates the potential for improved cycle efficiency. A theoretical availability model and an ideal thermodynamic cycle model are used to define the efficiency limits of CLC systems, illustrate the impact of reactor thermal coupling and discuss relevant criteria. An Aspen Plus model of a regenerative CLC cycle is then used to show that this thermal coupling raises the cycle efficiency by up to 2% points. A parametric study shows that efficiency varies inversely with pressure, with a maximum of 51% at 3 bar, 1000 C and 60% at 4 bar, 1400 C. The efficiency increases with CO2 fraction at high pressure ratios but exhibits a slight inverse dependence at low pressure ratios. The parametric study shows that for low purge steam demand, steam generation improves exhaust heat recovery and increases efficiency when an appropriate steam production strategy is adopted. (C) 2015 Elsevier Ltd. All rights reserved.

Using the Second Law of Thermodynamic to Improve Co2 Capture Systems

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Comparative Analysis on Temperature Swing Adsorption Cycle for Carbon Capture by Using Internal Heat/mass Recovery

Fuel Synthesis with Co2 Captured from Atmosphere: Thermodynamic Analysis

Advanced Exergy Analyses of an Ejector Expansion Transcritical Co2 Refrigeration System

Second Law Analysis Of Spectral Radiative Transfer And Calculation In One-Dimensional Furnace Cases

Optimal Design of a Subambient Membrane Separation System with Work and Heat Integration for CO2 Capture

Thermoeconomic analysis of sCO2 power cycles

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Derivation of Entropy and Exergy Transport Equations, and Application to Second Law Analysis of Sugarcane Bagasse Gasification in Bubbling Fluidized Beds

Tool for optimization of energy consumption of membrane-based carbon capture

CO2 Footprint of Thermal Versus Photothermal CO2 Catalysis.

Novel approach to CO 2 capture: Improving the hybridization between membranes and calcium-looping

CO2 Capture and Enhanced Hydrogen Production Enabled by Low-Temperature Separation of PSA Tail Gas: A Detailed Exergy Analysis

A thermodynamic approach to energy requirements for CO 2 capture and a comparison between the minimum energy for liquid and solid sorbent processes

Insights into Energetic Penalties in Electrochemical CO2 Separation Systems

Analysis of Thermally Coupled Chemical Looping Combustion-Based Power Plants with Carbon Capture

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

Bioenergy with Carbon Capture and Storage (BECCS) developed by coupling a Pressurised Chemical Looping combustor with a turbo expander: How to optimize plant efficiency

Techno-Economic and Environmental Evaluations of Decarbonized Fossil-Intensive Industrial Processes by Reactive Absorption & Adsorption CO2 Capture Systems