Abstract:In the sheet forming process, the final bending angle is mostly determined based on experience rather than based on a reliable theoretical framework. Furthermore, the local bent areas tend to decrease in thickness. Thus, it is difficult to control the quality of the final products. In this study, we developed an optimized bending angle function by combining segment boundaries to improve the final sheet forming quality and reduce the local thinning defects. The finite element submodel method was used to establish a high-definition thickness-sensitive numerical model for the bottom bending area of the hat-shaped part. This method accurately simulated the thickness variation law of the bending area of roll forming and analyzed the optimization function of the bending angle of the segment boundary as well as the process parameters for local thinning. Finally, roll-bending experiments were conducted to analyze the bending angle distribution conditions and the change law with respect to the process parameters of the cap-shaped parts in case of local thinning defects to verify the accuracy of the finite element simulation process. The results showed that the local thinning defect in the bending area of the hat-shaped part was smaller during roll bending, and the forming quality obtained was better than that obtained using other previously reported methods. The experimental data were consistent with the simulation data, verifying the accuracy of our proposed approach. Moreover, the thickness of the thinning defect was influenced by the process parameters; the plate bending radius and yield strength increased, and thickness thinning gradually decreased. Furthermore, the local thinning defects increased with the increasing plate thickness.

The Influence Factors of Forming Results in Medium-Thick Sheet Metal High Boss Forming Process

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Research on influence factors of forming force in medium-thick sheet metal extrusion process

An Experimental Study on Local Thickening Laws Based on Multi-Plate Extrusion

The analysis and prediction on the forming force during extrusion of medium-thick sheet metal

Deformation characteristics and fracture failure of multi-bosses forming process by plate forging

Investigation on the Factors Influencing the Thickness Distribution of Superplastic-Formed Components

The Effect of Variable Blank-Holder Forces on Formability of Ractangle Box Deep Drawing

Effect of variable blank-holder forces on the formability of aluminum alloy sheets during sheet metal forming

Study on the Forming Process Parameters of Automobile Front Panel Reinforcing Plate Using Orthogonal Experiment Method by Numerical Simulation Technology

Research on Metal Flow Behavior and Forming Force in Sheet Metal Extrusion Process

Experimental and Numerical Study of Forming Limit in 1060 Aluminum Ultrasonic Vibration Single Point Incremental Forming

Investigation of Shearing Extrusion Forming Process Using Finite Element Method

Influence of bending angle function on local thinning defects of roll-formed sheets based on segmental boundary combination optimization

Research on the Mechanism and Processability of Roll Forming

CAE Analysis of the Multi-Stage Forming Processes of Complicated Automobile Part

Formability Analysis of Electrically Assisted Double-Side Multi-Point Incremental Sheet Forming

Study on the Forming Process Parameters of Sleeper Fixed Reinforcing Plate Using Orthogonal Experiment Method by Numerical Simulation Technology

Deformation Characteristics and Microstructure Analysis of Aluminum Alloy Component with Complex Shape by Cold Orbital Forming

Numerical Simulation and Optimization of Press Forging Process for Aviation Connector

The Influence of Sheet Tilting on Forming Quality in Single Point Incremental Forming