Abstract:High-precision microelectromechanical system (MEMS) accelerometers have wide application in the military and civil fields. The closed-loop microaccelerometer interface circuit with switched capacitor topology has a high signal-to-noise ratio, wide bandwidth, good linearity, and easy implementation in complementary metal oxide semiconductor (CMOS) process. Aiming at the urgent need for high-precision MEMS accelerometers in geophones, we carried out relevant research on high-performance closed-loop application specific integrated circuit (ASIC) chips. According to the characteristics of the performance parameters and output signal of MEMS accelerometers used in geophones, a high-precision closed-loop interface ASIC chip based on electrostatic time-multiplexing feedback technology and proportion integration differentiation (PID) feedback control technology was designed and implemented. The interface circuit consisted of a low-noise charge-sensitive amplifier (CSA), a sampling and holding circuit, and a PID feedback circuit. We analyzed and optimized the noise characteristics of the interface circuit and used a capacitance compensation array method to eliminate misalignment of the sensitive element. The correlated double sampling (CDS) technology was used to eliminate low-frequency noise and offset of the interface circuit. The layout design and engineering batch chip were fabricated by a standard 0.35 μm CMOS process. The active area of the chip was 3.2 mm × 3 mm. We tested the performance of the accelerometer system with the following conditions: power dissipation of 7.7 mW with a 5 V power supply and noise density less than 0.5 μg/Hz1/2. The accelerometers had a sensitivity of 1.2 V/g and an input range of ±1.2 g. The nonlinearity was 0.15%, and the bias instability was about 50 μg.

Automatic measuring system of MEMS accelerometer

Development Of Automatic Vibration Calibration System

Testing System of Characteristics of Electrical Vibration Table

One Method to Improve the Temperature Stability of Processing Circuit of Digital Accelerometer

Digital Capacitance Measurement System Based on FPGA

A Way of Automatic Measuring Micro-Accelerometer Using Monolithic Computer

Design and realization of testing instrument applied to MEMS accelerometer sensor

Performance Testing of Micro-Electromechanical Acceleration Sensors for Pavement Vibration Monitoring

Design of Wireless Static Calibration Data Acquisition System for Acceleration Sensor

Design of MEMS High-G Micro Accelerometer Temperature Compensation

A sigma-delta interface built-in self-test and calibration for microelectromechanical system accelerometer's utilizing interpolation method

A 100- To- 10-Khz 5.4- To- 216- Μw Power-Efficient Readout Circuit Employing Closed-Loop Dynamic Amplifier for MEMS Capacitive Accelerometer.

MEMS Acceleration Sensor Vibration Detection System with LoRa Communication

Research on High-Resolution Miniaturized MEMS Accelerometer Interface ASIC

Implementation of Measuring and Monitoring System for Multiple Precise Vibrating-Wire Transducers

High Power-Efficiency Readout Circuit for MEMS Capacitive Accelerometer

An Improved Difference Temperature Compensation Method for MEMS Resonant Accelerometers

Combined Temperature Compensation Method for Closed-Loop Microelectromechanical System Capacitive Accelerometer

A Method of Precise Auto-Calibration in a Micro-Electro-Mechanical System Accelerometer

Design and Implementation of an Accelerometer Temperature Control System

Design and Development of a Low-Power Wireless MEMS Lead-Free Piezoelectric Accelerometer System