Numerical Simulation on Residual Deflection and Residual Stress of AZ31 Alloy Bars During Tension Straightening

WANG Xiao-hong,ZHANG Ding-fei,PENG Jian,ZHOU Chou,GAO Wei

DOI: https://doi.org/10.13289/j.issn.1009-6264.2010.10.004

2010-01-01

Abstract:The specimens are AZ31 bars with 16 mm diameter.The stress-strain curves of tensile specimens were obtained with a Gleeble1500D thermal simulator at different temperatures,and residual deflections were measured at different temperatures and residual tension strains.The residual deflections and residual stress fields of the specimens were simulated by finite element method(FEM).By comparing the measured residual deflections of the specimen with the simulated,it was found that the simulated error is very small which indicates this simulated model is effective.Based on the results mentioned above,the changes of residual stress fields of the AZ31 bars at different residual tensile strains and different temperatures are simulated.The results show that the region of residual stress field at the clamping region is the smallest where residual stress is the lowest,and clamping region is difficult to slip when T = 220 ℃ and er = 2%.The residual deflection can be minimized by a small amount of multiple stretch.