Abstract:This paper aims to use nuclear magnetic resonance (NMR) for investigating the effect of nanofillers on the C-S-H gel structure of hardened cement paste, analyze the modification mechanism of nanofillers from a microscopic perspective, and then provide fundamentals for controlling the macroscopic properties of cement-based materials. Different curing temperatures (25 degrees C and 90 degrees C) and nanofiller types [including nano-SiO2, nano-ZrO2, nano-TiO2, carbon nanotubes (CNTs), nano-boron nitride (nano-BN), and multilayer graphenes (MLGs)] are considered as the influencing factors. Three characterization parameters [polymerization degree, mean molecular chain length (MCL), and hydration degree] are calculated and used as the evaluation indexes. Experimental results show that the incorporation of most types of nanofillers can cause increases in all of these three parameters. With the increase of curing temperature, the polymerization degree of C-S-H gel is further enhanced, because the layered or even spatial network structures of silicate tetrahedron occur in the C-S-H gel. The composites with MLGs present the maximum increase values of polymerization degree, MCL, and hydration degree, by 786.2%, 166.5%, and 27.4% compared with control cement paste, respectively, which is mainly attributed to the nanofiller morphology (unique two-dimensional stacked flake structure) and the functional group (carboxyl-functionalized) on the surface of nanofillers. Fluctuations of polymerization degree and MCL appear in composites with nano-TiO2 and with CNTs, relative to the particle sizes, crystal phases, and surface modification of nanofillers. The effect mechanisms of nanofillers on C-S-H gel can be attributed to two main aspects: (1)the nucleation effect and pozzolanic effect (just for nano-SiO2) of nanofillers facilitate the cement hydration; (2)the high water absorption capability of nanofillers reduces the proton water inside C-S-H gel, and shortens the distance between the structural groups of Ca, O, and Si atoms. The chemical bonds (ionic bonds and covalent bonds) between these groups are enhanced and the values of polymerization degree and MCL are therefore increased.

INVESTIGATION ON NANO-SCALE MICROSTRUCTURE OF C-S-H WITH ATOMIC FORCE MICROSCOPE

Evaluation of the nanostructure of calcium silicate hydrate based on atomic force microscopy-infrared spectroscopy experiments

Probing Nanostructure of Calcium Silicate Hydrate by Afm and Nanoindentation

The Microstructure Formation of C-S-H in the HPC Paste from Nano-Scale Feature

Effect of Calcium to Silicon Ratio on the Microstructure of Hydrated Calcium Silicate Gels Prepared under Medium Alkalinity

Mechanical behaviour of C-S-H agglomerates at multiscale

The Morphology of C-S-H in Low Water/Cement Ratio Paste from Nano to Micro Scale

Nanostructure of Calcium Silicate Hydrate Gels in Cement Paste

Calcium Silicate Hydrate Colloid at Different Humidities: Microstructure, Deformation Mechanism, and Mechanical Properties

Colloid Model of C-S-H in Cement: from a Single Molecule to Microstructure

New insights into the non-classical nucleation of C-S-H

The nanogranular nature of C–S–H

Nanoscale determination of calcium silicate hydrate (C-S-H) precursors crystallized at extreme early stage

Simulation Analysis of Microstructure Development of Tricalcium Silicate Using the Needle Model of Calcium Silicate Hydrate

Measuring the surface cohesion of calcium silicate hydrate

Atomic-Level and Surface Structure of Calcium Silicate Hydrate Nanofoils

Multi-scale investigation on composition-structure of C-(A)-S-H with different Al/Si ratios under attack of decalcification action

A Facile Method to Control the Structure and Morphology of Α-Calcium Sulfate Hemihydrate

Mesoscopic Packing of Disk-Like Building Blocks in Calcium Silicate Hydrate.

Uniaxial tensile study of calcium aluminosilicate hydrate (C-A-S-H): Structure, dynamics and mechanical properties

Effect Investigation of Nanofillers on C-S-H Gel Structure with Si NMR