Abstract:A commercial polyamide reverse osmosis (RO) membrane was surface modified in a sequential two-step dip coating process for improvement of the hydrophilicity and fouling resistance. In the first step, an ultrathin metal-polyphenol precursor layer was deposited onto the membrane surface via the self-assembly of tannic acid (TA) and Fe(III) ions, and polyethylenimine (PEI) was added as a covalent cross-linker. In the second step, poly(N-vinylpyrrolidone) (PVP), a common hydrophilic polymer, was immobilized onto the metal-polyphenol precursor layer through the strong hydrogen bonding interactions between the lactam groups in PVP and the phenolic hydroxyl groups in the precursor layer. X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), transmission electron microscopy (TEM) and zeta potential measurements confirmed the successful immobilization of the precursor layer and PVP. Atomic force microscopy (AFM) test indicated a smoother surface of the modified membrane. Furthermore, the water flux of the modified membrane was only slightly decreased and the salt rejection was almost unchanged. More importantly, static contact angle measurement showed that the membrane surface hydrophilicity was significantly improved after the PVP immobilization (contact angle from 59.0±1.2° to 14.5±2.4°). Membrane fouling experiments were performed over three “filtration–rinsing” cycles using two proteins (lysozyme and bovine serum albumin) and one polysaccharide (sodium alginate) as model foulants. The results of the fouling experiments revealed that the fouling resistance of the reverse osmosis membrane was obviously improved by the surface immobilization of PVP. Besides, cross-flow filtration test under high hydrodynamic shear condition for 15 days indicated the excellent stability of the immobilized PVP. This work provided a new potential strategy for improving the fouling resistance of RO membranes.

Flux enhancement for polypropylene microporous membrane in a SMBR by the immobilization of poly(N-vinyl-2-pyrrolidone) on the membrane surface

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Improvement of Surface Properties of Poly(propylene) Hollow Fiber Microporous Membranes by Plasma‐Induced Tethering of Sugar Moieties

In-situ modification of PVDF membrane during phase-inversion process using carbon nanosphere sol as coagulation bath for enhancing anti-fouling ability

Fouling Control In A Submerged Membrane-Bioreactor By The Membrane Surface Modification

Surface Modification of Polypropylene Microfiltration Membranes by the Immobilization of Poly(n-Vinyl-2-pyrrolidone): a Facile Plasma Approach

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Improvement of the Antifouling Characteristics for Polypropylene Microporous Membranes by the Sequential Photoinduced Graft Polymerization of Acrylic Acid

Surface modification of polypropylene microporous membrane to improve its antifouling property in MBR: CO2 plasma treatment

Surface modification of polypropylene microporous membranes to improve their antifouling property in MBR: NH3 plasma treatment

Modification of poly(vinylidene fluoride)/polyethersulfone blend membrane with polyvinyl alcohol for improving antifouling ability

Surface Modification of Polyvinylidene Fluoride Membrane by Atom-Transfer Radical-Polymerization of Quaternary Ammonium Compound for Mitigating Biofouling

Surface Modification of Polypropylene Macroporous Membrane to Improve Its Antifouling Characteristics in a Submerged Membrane-Bioreactor: H(2)O Plasma Treatment.

Surface modification of polypropylene microfiltration membranes by the immobilization of poly (N-vinyl-2-pyrrolidone): a facile plasma approach

Improving the hydrophilicity and fouling resistance of RO membranes by surface immobilization of PVP based on a metal-polyphenol precursor layer

Antifouling Characteristics of Sugar Immobilized Polypropylene Microporous Membrane by Activated Sludge and Bovine Serum Albumin

Highly Effective Antifouling Performance of N-Vinyl-2-Pyrrolidone Modified Polypropylene Non-Woven Fabric Membranes by Atrp Method

The effect of PVDF concentration on PVDF/woven tube composite membranes and the application of composite membranes in SMBR

Photoinduced graft polymerization of acrylamide on polypropylene microporous membranes for the improvement of antifouling characteristics in a submerged membrane-bioreactor

Surface Modification Of Microporous Polypropylene Membranes By Plasma-Induced Graft Polymerization Of Alpha-Allyl Glucoside