Abstract:Sensitive and selective detection of acetone in human exhaled breath plays an important role in the diagnosis of diabetes. However, obtaining a reliable response to ppb levels of acetone and avoiding cross-sensitivity due to the large amount of moisture in exhaled breath are still great challenges. In this work, a type of acetone sensor with ultrahigh sensitivity and moisture resistance is reported. Electrospun In2O3 nanowires with a controllable Pt core (Pt@In2O3 core-shell nanowires) are designed and prepared as sensitive layers. A mesoporous silica molecular sieve is further integrated as the moisture filter layer. The Pt@In2O3 core-shell nanowire-based sensor exhibits a highly improved response compared with a sensor based on pure In2O3 nanowires due to the probable increase in surface resistance and the introduction of p–n junctions after rational design of the structure. In addition, a good performance in terms of the fast dynamic process, selectivity and long-term stability is also achieved, and the detection limit can be as low as 10 ppb, which is much lower than the concentration level of 1.8 ppm in the exhaled breath of diabetic patients. The influence of the large amount of moisture is greatly weakened by using the molecular sieve as a moisture filter layer, leading to much improved sensitivity in clinical sample detection among healthy and diabetic patients. Based on the optimized composite structure of the Pt@In2O3 core-shell nanowire sensor and moisture filter layer, a simple portable sensing prototype is successfully fabricated. The reported Pt@In2O3 core-shell nanowires and the acetone sensing approach open up a new opportunity for a simple, inexpensive, and noninvasive diagnosis of diabetes.

A highly sensitive QCM sensor coated with Ag+-ZSM-5 film for medical diagnosis

A QCM Gas Sensor Decorated by Zeolite Molecular Sieve for Disease Diagnosis

The Optimal Design and Application QCM Gas Sensor

A Wireless Electrode-Free QCM-D in a Multi-Resonance Mode for Volatile Organic Compounds Discrimination

A Hybrid Wireless Electrodeless QCM-D for the Discrimination of Volatile Organic Compounds

YSZ-based Acetone Sensor Using a Cd2SnO4 Sensing Electrode for Exhaled Breath Detection in Medical Diagnosis

Preparation of Graphene Quantum Dots and Their Sensing Properties in Quartz Crystal Microbalance Acetone Sensor

Ultrasensitive Acetone Gas Sensor Based on a K/Sn-Co3O4 Porous Microsphere for Noninvasive Diabetes Diagnosis.

Stabilized Zirconia-Based Acetone Sensor Utilizing Fe2TiO5-TiO2 Sensing Electrode for Noninvasive Diagnosis of Diabetics

Ultrasensitive Acetone Gas Sensor Can Distinguish the Diabetic State of People and Its High Performance Analysis by First-Principles Calculation

A Study on QCM Sensor for Identification of Acetone Vapor

Ultrasensitive Acetone Gas Sensor Based on a K/Sn-Co 3 O 4 Porous Microsphere for Noninvasive Diabetes Diagnosis

Graphene quantum dot-functionalized three-dimensional ordered mesoporous ZnO for acetone detection toward diagnosis of diabetes

YSZ-based Mixed Potential Type Acetone Gas Sensor Attached with CuSb2O6 Sensing Electrode for Ketosis Diagnosis

Gas Sniffer (Ysz-Based Electrochemical Gas Phase Sensor) Toward Acetone Detection

A Highly Sensitive Quartz Crystal Microbalance Sensor Modified with Antifouling Microgels for Saliva Glucose Monitoring

Acetone Sensors for Non-Invasive Diagnosis of Diabetes Based on Metal-Oxide-semiconductor Materials

Efficient mixed-potential acetone sensor with yttria-stabilized zirconia and porous Co3O4 nanofoam sensing electrode for hazardous gas monitoring and breath analysis

Mach-Zehnder Interferometer Based Integrated-Photonic Acetone Sensor Approaching the Sub-Ppm Level Detection Limit.

A highly sensitive and moisture-resistant gas sensor for diabetes diagnosis with Pt@In2O3 nanowires and a molecular sieve for protection

Nitrogen-Doped Carbon Quantum Dots Activated Dandelion-Like Hierarchical WO3 for Highly Sensitive and Selective MEMS Sensors in Diabetes Detection