Abstract:Self-expanding frames for minimally invasive implants are typically made from nitinol wires and are heat treated to maintain the desired shapes. In the process of heat treatment, nitinol structures are placed in a high-temperature oven, while they are confined by a fixture. During this process, nitinol exerts a high amount of force. Accordingly, a fixture requires high mechanical strength and temperature resistance; this is why fixtures are typically made from metals. The use of metal fixture also increases the turnaround time and cost. However, accelerating this process is beneficial in many applications, such as rapid development of medical implants that are patient-specific. Inspired by the use of sacrificial layers in microfabrication technology, here we propose a novel method for shape setting nitinol wires using a sacrificial metal fixture. In this process, the nitinol wires are first aligned inside copper hypotubes. Next, the forming process is done using hand-held tools to shape complex geometrical structures, annealing the nitinol reinforced by copper, and then selectively etching copper hypotubes in ammonium persulfate solutions. In this process, other sacrificial cores, which are 3D printed or cast from low-cost polymers, are also used. This combination of polymeric cores and minimal use of metals enables reducing the cost and the turnaround time. As a proof of concept, we showed that this process was capable of fabricating springs with mm or sub-mm diameters. The result showed a change of less than 5% in the intended diameter of the nitinol spring with diameters ranging from ~ 0.7 to 1.9 mm, which confirms copper as a suitable sacrificial fixture to obtain the desired complex geometry for nitinol. A metric, based on the elastic strain stored in copper is suggested to predict the possible variation of the intended dimensions in this process. Finally, to demonstrate the potential of this method, as proof of concept, we fabricated NiTi wire frames designed for anchoring through the atrial septum. These frames demonstrated septal defect occluders that were designed based on a patient's cardiac image available in the public domain. This low-cost rapid fabrication technique is highly beneficial for a variety of applications in engineering and medicine with specific applications in rapid prototyping of medical implants.

[Nitinol Alloy's Applications in Cerebral Interventional Devices].

Nitinol: From historical milestones to functional properties and biomedical applications

Applications of Nickel-Titanium Alloy

TEM study of the Ni-Ti shape memory micro-wire

ALD mediated heparin grafting on nitinol for self-expanded carotid stents.

Design and development of novel antibacterial Ti-Ni-Cu shape memory alloys for biomedical application

Crustacean Immunity

Recent developments in nonferrous metals and related materials for biomedical applications in China: a review

Safety and Efficacy of Nano Lamellar TiN Coatings on Nitinol Atrial Septal Defect Occluders in Vivo

Preparation of ROS‐Responsive Exosome Coating of Nitinol Material for Making the Neurointerventional Stent

Development and Applications of Nickel-Titanium Alloys with Shape Memory Effect and Superelasticity

Nanocoating of Diazoresin/Polysaccharides Multilayer Boosts Biocompatibility of Nitinol Biomedical Devices

A review on surface modification of NiTinol for biomedical applications

In vitro corrosion behavior of nano-multilayered TiN/Ti coated NiTi alloy

In Vitro Investigation of Nitiw Shape Memory Alloy As Potential Biomaterial with Enhanced Radiopacity

Low-cost prototyping of nitinol wires/frames using polymeric cores and sacrificial fixtures with application in individualized frames anchoring through the atrial septum

Post-Processing of NiTi Alloys: Issues and Challenges

Electrolytic Polishing Process of Intravascular Nitinol Stents

Current Status and Outlook of Biodegradable Metals in Neuroscience and Their Potential Applications As Cerebral Vascular Stent Materials

In vitro and in vivo characterization of novel plasma treated nickel titanium shape memory alloy for orthopedic implantation

Research on the Heat Treatment Process of Intravascular Nitinol Stents