Prevalence of peripheral and autonomic neuropathy in newly diagnosed type II (noninsulin-dependent) diabetes.

K. Ratzmann,Martin Raschke,I. Gander,E. Schimke

DOI: https://doi.org/10.1016/0891-6632(91)90002-7

Journal of Diabetic Complications

Abstract:

What problem does this paper attempt to address?

Applications of Nickel-Titanium Alloy

Neeraj Sharma,Tilak Raj,Kamal Kumar Jangra,KamalKumar Jangra

DOI: https://doi.org/10.4103/0976-8580.149472

2015-01-01

Abstract:Nitinol exists in equiatomic phase of nickel-titanium (Ni-Ti). Nitinol has various applications in biomedical, automotive actuators, micro-electromechanical systems (MEMSs) and aero-space industries due to its distinctive properties of pseudo-elasticity, bio-compatibility, corrosion resistance and shape memory effect. This paper presents the applications of nickel-titanium alloy in various field of engineering, medical and other area. The attractive properties of NiTi alloy has also been discussed that makes it most influential material for various applications.

English Else
Post-Processing of NiTi Alloys: Issues and Challenges

N. Sharma,K. Kumar,V. Kumar

DOI: https://doi.org/10.1007/s11106-018-9933-9

2018-01-01

Powder Metallurgy and Metal Ceramics

Abstract:Nitinol (NiTi) exists in an equiatomic phase of Ni and Ti. Nitinol has growing applications in aerospace and medical industries due to its unique properties of pseudoelasticity, corrosion resistance, shape memory effect, and biocompatibility. NiTi can be produced by conventional and nonconventional manufacturing routes and its behavior can be modified by altering the composition, changing the porosity, and shape setting under varying thermal and mechanical treatment. After the fabrication, several post-processing operations are required on NiTi for desired application. This paper presents a brief on post-processing like machining, surface coating, and mechanical and thermal treatment for shape setting of NiTi alloys, and their issues and challenges.

metallurgy & metallurgical engineering,materials science, ceramics
A review on surface modification of NiTinol for biomedical applications

Tabassum Billah,Tahmidul Islam Aquib,Kamol Dey

DOI: https://doi.org/10.1007/s10853-024-10273-8

IF: 4.5

2024-10-03

Journal of Materials Science

Abstract:The unique qualities of nickel-titanium alloys (NiTinol) make them promising materials for biomedical applications. Despite the potential benefits, certain issues, such as nickel leaching, raise health concerns. The necessity of treating bare NiTinol before human implantation emphasizes the need for surface modifications that improve biocompatibility without sacrificing the inherent qualities of the alloy. Although NiTinol alloys have been used since the 1960s, a comprehensive review on the surface modification of these alloys is still lacking. In this review article, we have examined all commercially available surface modification techniques applied to NiTinol alloys in depth, including mechanical polishing, chemical etching, heat treatment, ion implantation techniques, coating approaches, sterilization methods, and alloying strategies. The benefits and drawbacks of each technique are explored, with an emphasis on the diverse effects they have on appearance, corrosion resistance, biocompatibility, cell growth, and hemocompatibility. This paper also discusses the current advancements and research on the surface modification of NiTinol as well as its potential for use in biomedical applications. The overall goal of this review is to provide guidance for choosing the right surface treatments that will improve the functionality of NiTi alloys in various biomedical devices.

materials science, multidisciplinary
TEM study of the Ni-Ti shape memory micro-wire

H. Tian,D. Schryvers,J. Van Humbeeck

DOI: https://doi.org/10.1007/978-3-540-85226-1_249

2008-01-01

Abstract:Today, due to its unique mechanical properties, durability and biocompatibility, applications of Nitinol in a wide variety of medical implants are progressively increasing [1–3]. However, as Nitinol consists of about 50 at. % Ni, certain applications are still hindered by the concern of free Ni release in the surrounding tissue. It is known that the biocompatibility of the implants made from TiNi alloys depends on a corrosion resistant titanium oxide layer avoiding the severe toxicological and allergic responses of Ni. The latter is controlled by the structure of (near-) surface layers which can strongly be affected by various surface treatments [3,4]. In this present work, the oxide surface of an as-received Nitinol micro-wire is investigated by different TEM techniques. FIB was used to prepare near surface cross-section sample.
Crustacean Immunity

D. Destoumieux-Garzón,D. Saulnier,J. Garnier,C. Jouffrey,P. Bulet,E. Bachère

DOI: https://doi.org/10.1074/JBC.M103817200

IF: 5.485

2001-12-14

Journal of Biological Chemistry

Abstract:We report here the isolation from plasma of two penaeid shrimp species of novel peptides/polypeptides with exclusive antifungal activities. A set of three molecules was purified with molecular masses at 2.7 kDa (Penaeus vannamei), 7.9 kDa, and 8.3 kDa (Penaeus stylirostris). Primary structure determination was performed by a combination of Edman degradation and mass spectrometry. The peptides display 95–100% sequence identity with a C-terminal sequence of hemocyanin, indicating that they are cleaved fragments of the shrimp respiratory protein. Specific immunodetection of the hemocyanin-derived (poly)peptides revealed that experimental microbial infections increase their relative concentration in plasma as compared with nonstimulated animals. Thus, the production of antifungal (poly)peptides by limited proteolysis of hemocyanin could be relevant to a shrimp immune reaction that would confer a new function to the multifunctional respiratory pigment of crustaceans.
SLM Additive Manufacturing of NiTi Porous Implants: A Review of Constitutive Models, Finite Element Simulations, Manufacturing, Heat Treatment, Mechanical, and Biomedical Studies

Mojtaba Jalali,Kaivan Mohammadi,Mohammad R. Movahhedy,Farzad Karimi,Sayed Khatiboleslam Sadrnezhaad,Stanislav V. Chernyshikhin,Igor V. Shishkovsky

DOI: https://doi.org/10.1007/s12540-023-01401-1

IF: 3.451

2023-02-27

Metals and Materials International

Abstract:Nitinol shape memory alloy is a biocompatible material that is suitable for biomedical applications due to its superelasticity, shape memory effect, good corrosion and fatigue resistance, and sound damping properties. With the selective laser melting (SLM) additive manufacturing process, it is possible to produce customized NiTi implants in the form of porous metamaterials with complex geometries. This paper presents a review of modeling, production, and application of NiTi implants. First, the fundamentals of shape memory alloys and the SLM process are summarized. Then, the effects of the SLM process on the transformation temperatures and the impacts of Heat treatments on these temperatures for additive manufactured parts are discussed. Next, a review of recent experimental works on the mechanical properties of NiTi lattice structures are presented regarding the required functional properties of orthopedic implants. Also, in vitro and in vivo biological studies of NiTi implants are reviewed. Finally, constitutive models developed for SMAs are presented and finite element simulations of NiTi lattice structures are discussed.Graphical Abstract

materials science, multidisciplinary,metallurgy & metallurgical engineering
In vitro evaluation of the biocompatibility and bioactivity of a SLM-fabricated NiTi alloy with superior tensile property

Yu Sun,Zhihui Zhang,Qingping Liu,Luquan Ren,Jincheng Wang

DOI: https://doi.org/10.1007/s10856-024-06822-x

2024-08-23

Abstract:Because nickel-titanium (NiTi) alloys have unique functions, such as superelasticity, shape memory, and hysteresis similar to bone in the loading-unloading cycles of their recoverable deformations. They likely offer good bone integration, a low loosening rate, individual customization, and ease of insertion. Due to the poor processability of NITI, traditional methods cannot manufacture NiTi products with complex shapes. Orthopedic NiTi implants need to show an adequate fracture elongation of at least 8%. Additive manufacturing can be used to prepare NiTi implants with complex structures and tunable porosity. However, as previously reported, additively manufactured NiTi alloys could only exhibit a maximum tensile fracture strain of 7%. In new reports, a selective laser melting (SLM)-NiTi alloy has shown greater tensile strain (15.6%). Nevertheless, due to the unique microstructure of additive manufacturing NiTi that differs from traditional NITI, the biocompatibility of SLM-NITI manufactured by this new process requires further evaluation In this study, the effects of the improved NiTi alloy on bone marrow mesenchymal stem cell (BMSC) proliferation, adhesion, and cell viability were investigated via in vitro studies. A commercial Ti-6Al-4V alloy was studied side-by-side for comparison. Like the Ti-6Al-4V alloy, the SLM-NiTi alloy exhibited low cytotoxicity toward BMSCs and similar effect on cell adhesion or cell viability. This study demonstrates that the new SLM-NiTi alloy, which has exhibited improved mechanical properties, also displays excellent biocompatibility. Therefore, this alloy may be a superior implant material in biomedical implantation.
A Review on Design and Mechanical Properties of Additively Manufactured NiTi Implants for Orthopedic Applications

Yintao Zhang,Shokouh Attarilar,Liqiang Wang,Weijie Lu,Junlin Yang,Yuanfei Fu

DOI: https://doi.org/10.18063/ijb.v7i2.340

2021-04-15

International Journal of Bioprinting

Abstract:NiTi alloy has a wide range of applications as a biomaterial due to its high ductility, low corrosion rate, and favorable biocompatibility. Although Young’s modulus of NiTi is relatively low, it still needs to be reduced; one of the promising ways is by introducing porous structure. Traditional manufacturing processes, such as casting, can hardly produce complex porous structures. Additive manufacturing (AM) is one of the most advanced manufacturing technologies that can solve impurity issues, and selective laser melting (SLM) is one of the well-known methods. This paper reviews the developments of AMNiTi with a particular focus on SLM-NiTi utilization in biomedical applications. Correspondingly, this paper aims to describe the three key factors, including powder preparation, processing parameters, and gas atmosphere during the overall process of porous NiTi. The porous structure design is of vital importance, so the unit cell and pore parameters are discussed. The mechanical properties of SLM-NiTi, such as hardness, compressive strength, tensile strength, fatigue behavior, and damping properties and their relationship with design parameters are summarized. In the end, it points out the current challenges. Considering the increasing application of NiTi implants, this review paper may open new frontiers for advanced and modern designs.

engineering, biomedical,materials science, biomaterials
Experimental Investigation of the Biofunctional Properties of Nickel-Titanium Alloys Depending on the Type of Production

Minja Miličić Lazić,Peter Majerič,Vojkan Lazić,Jelena Milašin,Milica Jakšić,Dijana Trišić,Katarina Radović

DOI: https://doi.org/10.3390/molecules27061960

IF: 4.6

2022-03-17

Molecules

Abstract:Nickel-titanium alloys used in dentistry have a variety of mechanical, chemical, and biofunctional properties that are dependent on the manufacturing process. The aim of this study was to compare the mechanical and biofunctional performances of a nickel-titanium alloy produced by the continuous casting method (NiTi-2) with commercial nitinol (NiTi-1) manufactured by the classical process, i.e., from remelting in a vacuum furnace with electro-resistive heating and final casting into ingots. The chemical composition of the tested samples was analyzed using an energy dispersive X-ray analysis (EDX) and X-ray fluorescence (XRF). Electron backscatter diffraction (EBSD) quantitative microstructural analysis was performed to determine phase distribution in the samples. As part of the mechanical properties, the hardness on the surface of samples was measured with the static Vickers method. The release of metal ions (Ni, Ti) in artificial saliva (pH 6.5) and lactic acid (pH 2.3) was measured using a static immersion test. Finally, the resulting corrosion layer was revealed by means of a scanning electron microscope (SEM), which allows the detection and direct measurement of the formatted oxide layer thickness. To assess the biocompatibility of the tested nickel-titanium alloy samples, an MTT test of fibroblast cellular proliferation on direct contact with the samples was performed. The obtained data were analyzed with the IBM SPSS Statistics v22 software. EDX and XRF analyses showed a higher presence of Ni in the NiTi-2 sample. The EBSD analysis detected an additional NiTi2-cubic phase in the NiTi-2 microstructure. Additionally, in the NiTi-2 higher hardness was measured. An immersion test performed in artificial saliva after 7 days did not induce significant ion release in either group of samples (NiTi-1 and NiTi-2). The acidic environment significantly increased the release of toxic ions in both types of samples. However, Ni ion release was two times lower, and Ti ion release was three times lower from NiTi-2 than from NiTi-1. Comparison of the cells' mitochondrial activity between the NiTi-1 and NiTi-2 groups did not show a statistically significant difference. In conclusion, we obtained an alloy of small diameter with an appropriate microstructure and better response compared to classic NiTi material. Thus, it appears from the present study that the continuous cast technology offers new possibilities for the production of NiTi material for usage in dentistry.
High-dose ifosfamide by infusion with mesna in advanced soft tissue sarcoma.

R. Stuart-Harris,P. Harper,Stan B. Kaye,Eve Wiltshaw

DOI: https://doi.org/10.1016/S0305-7372(83)80023-1

IF: 13.608

1983-09-01

Cancer Treatment Reviews

Abstract:
A review of NiTi shape memory alloy as a smart material produced by additive manufacturing

Eduard Farber,Jia-Ning Zhu,Anatoliy Popovich,Vera Popovich

DOI: https://doi.org/10.1016/j.matpr.2020.01.563

2020-01-01

Materials Today: Proceedings

Abstract:Nitinol (nickel-titanium or Ni-Ti) is one of the most utilized alloys exhibiting the Shape Memory Effect, which makes it possible to use it in many applications, such as aerospace, automotive, biomedical and others. The development of Additive Manufacturing technologies allows creating the latest time-dependent 4D products from nitinol that can realize the Shape Memory Effect after 3D-printing, which in the future will further increase the use of nitinol. However, processing nitinol is highly sensitive to compositional and thermal changes, affecting the final phase structure and thus temperature of the martensitic transformation. This paper presents a review of various effects of composition and 3D-printing process parameters on changes in transformation characteristics, as well as possible methods for their prevention and post-process heat treatments. It is reported that only by precise process and temperature control it is possible to create 4D products with the ability to realize the multi-stage shape memory effect. Finally, the paper discusses the various application of 3D-printed Nitinol and its advantages as compared to conventional processing routes.
Prospects of Production and Application of Hybrid Structures and Composites Made of Titanium Alloys and Nitinol: Overview

K. S. Senkevich

DOI: https://doi.org/10.3103/S1067821219010115

2019-10-07

Abstract:Titanium-based alloys are widely used in various industries due to their combination of high mechanical properties and low density. These properties are most effectively used when fabricating aircraft components and medical implants. Shape-memory alloys based on titanium nickelide (nitinol) are promising materials for the fabrication of superelastic medical implants and tools, as well as thermomechanical elements in aerospace technology. The joint application of these materials as elements of hybrid structures or composites is promising for the development of products with a unique set of properties such as high mechanical properties, superelasticity, and damping capacity; increased wear resistance; and thermal shape memory. The basic properties of alloys based on titanium nickelide and the most widely used VT6 titanium alloy (Ti–6Al–4V) are analyzed. It is shown that the combination of functional properties of nitinol and structural properties of titanium alloys in an integrated structure makes it possible to fabricate various products, especially for aerospace and medical industries. To fabricate such structures, various welding (mainly laser and diffusion welding) and soldering methods are currently investigated, and the best prospects are associated with the use of intermediate layers that eliminate the formation of brittle intermetallic phases in permanent joints.

metallurgy & metallurgical engineering
An Efficient Approach for Nitrogen Diffusion and Surface Nitriding of Boron-Titanium Modified Stainless Steel Alloy for Biomedical Applications

Sadaqat Ali,Ahmad Majdi Abdul Rani,Riaz Ahmad Mufti,Sri Hastuty,Murid Hussain,Nasir Shehzad,Zeeshan Baig,Abdul Azeez Abdu Aliyu

DOI: https://doi.org/10.3390/met9070755

IF: 2.695

2019-07-05

Metals

Abstract:Austenitic 316L stainless steel has been the most widely acceptable biomaterial for producing implants. The downside of this material includes the leaching of nickel ions from the matrix that limits its’ usage in implant manufacturing. In this research, production of stainless steel alloy modified with boron and titanium is investigated. The sintering of the alloy systems is carried out in nitrogen atmosphere for a dwell time of 8 h. The X-Ray diffraction (XRD) analysis reveals that dwell time and alloy composition leads to the formation of strong nitrides and borides. The X-Ray Photoelectron Spectroscopy (XPS) results show the presence of nitrogen on to the surface of sintered specimens. The nitride layer on the surface of the specimens is helpful in the retention of nickel ions in the stainless steel matrix, as indicated in the weight loss measurements. The cytotoxicity assessment indicates that the developed alloys are biocompatible and can be used as implant materials.

materials science, multidisciplinary,metallurgy & metallurgical engineering
In vitro and in vivo characterization of novel plasma treated nickel titanium shape memory alloy for orthopedic implantation

K.W.K. Yeung,R.Y.L. Chan,K.O. Lam,S.L. Wu,X.M. Liu,C.Y. Chung,Paul K. Chu,W.W. Lu,D. Chan,K.D.K. Luk,K.M.C. Cheung

DOI: https://doi.org/10.1016/j.surfcoat.2007.07.093

2007-01-01

Abstract:Nickel-titanium (NiTi) shape memory alloys are potentially very useful in orthopedic and dental implantation, since the materials possess super-elasticity and shape memory effects that other current medical metallic materials do not have. Possible nickel ion release, however, hampers their medical applications, particularly in orthopedic implants where fretting is always expected at the articulating surface. We have utilized plasma immersion ion implantation (PIII) to alter the surface chemistry of the materials in order to reduce nickel release. The enhanced corrosion resistance and surface mechanical properties have been reported previously. This paper describes the cytocompatibility and in vivo performance of the PIII treated and untreated samples. NiTi discs with 50.8% Ni were treated by nitrogen and oxygen PIII at 40 kV After PIII, titanium nitride (TiN) and packed titanium oxide (TiO) are formed on the surface. The degree of cell proliferation on the untreated and oxygen treated samples is slightly inferior to that on the nitrogen treated sample. However, in vivo bone formation on the nitrogen plasma treated samples is better compared to the untreated control and oxygen treated one at all time points. Our work thus provides the evidence that nitrogen plasma modified NiTi alloys are potentially suitable for orthopedics without inducing harmful biological effects. (C) 2007 Elsevier B.V. All rights reserved.
Evidence for functional ryanodine receptors in Schistosoma mansoni and their putative role in the control of calcium homeostasis.

C. Silva,D. Mendonça-Silva,F. Noël

DOI: https://doi.org/10.1590/S0074-02761998000700051

Memórias do Instituto Oswaldo Cruz

Abstract:The main musculature present in adult maleSchistosoma mansoni is mainly of the smoothmuscle type (MH Silk & IM Spence 1969 S Afr JMed Sci 34: 11-20). As we have previously dem-onstrated, the contraction of S. mansoni presents atonic component, dependent on extraworm cal-cium, and a phasic one, dependent on intracellu-lar/intraworm calcium (S da Silva & F Noel 1995Parasitol Res 81: 543-548). Since intracellularcalcium channels sensitive to the alkaloidryanodine and therefore known as ryanodine re-ceptors (RyR) (R Coronado et al. 1994 Am JPhysiol 266: C1485-C1504) have been demon-strated in a variety of mammalian as well as non-mammalian (chicken, frog) and non-vertebratecells (Caenorhabditis elegans , lobster and droso-phila) (G Meissner 1994 Annu Rev Physiol 56:485-508), the main objective of this work was toinvestigate the presence of RyR in S. mansoni, aswell as their subcellular distribution profile, phar-macological modulation and their putative involve-ment in S. mansoni contractility.About 2,000 worms were homogenized in aDounce homogenizer at 4
Surface Characteristics, Biocompatibility, And Mechanical Properties Of Nickel-Titanium Plasma-Implanted With Nitrogen At Different Implantation Voltages

X. M. Liu,S. L. Wu,Y. L. Chan,Paul K. Chu,C. Y. Chung,C. L. Chu,K. W. K. Yeung,W. W. Lu,K. M. C. Cheung,K. D. K. Luk

DOI: https://doi.org/10.1002/jbm.a.31157

2007-01-01

Journal of Biomedical Materials Research Part A

Abstract:NiTi shape memory alloy is one of the promising orthopedic materials due to the unique shape memory effect and superelasticity. However, the large amount of Ni in the alloy may cause allergic reactions and toxic effects thereby limiting its applications. In this work, the surface of NiTi alloy was modified by nitrogen plasma immersion ion implantation (N-PIII) at various voltages. The materials were characterized by X-ray photoelectron spectroscopy (XPS). The topography and roughness before and after N-PIII were measured by atomic force microscope. The effects of the modified surfaces on nickel release and cytotoxicity were assessed by immersion tests and cell cultures. The XPS results reveal that near-surface Ni concentration is significantly reduced by PIII and the surface TiN layer suppresses nickel release and favors osteoblast proliferation, especially for samples implanted at higher voltages. The surfaces produced at higher voltages of 30 and 40 kV show better adhesion ability to osteoblasts compared to the unimplanted and 20 kV PIII samples. The effects of heating during PIII on the phase transformation behavior and cyclic deformation response of the materials were investigated by differential scanning calorimetry and three-point bending tests. Our results show that N-PIlI conducted using the proper conditions improves the biocompatibility and mechanical properties of the NiTi alloy significantly. (c) 2007 Wiley Periodicals, Inc.
Cytotoxic, allergic and genotoxic activity of a nickel-titanium alloy

D.J. Wever,A.G. Veldhuizen,M.M. Sanders,J.M. Schakenraad,J.R. van Horn

DOI: https://doi.org/10.1016/s0142-9612(97)00041-0

IF: 14

1997-08-01

Biomaterials

Abstract:The nearly equiatomic nickel-titanium (NiTi) alloy is known for its shape memory properties. These properties can be put to excellent use in various biomedical applications, such as wires for orthodontic tooth alignment and osteosynthesis staples. The aim of this study was to evaluate the short-term biological safety of the NiTi alloy. We carried out an end-point dilution minimal essential medium (MEM) extract cytotoxicity test, a guinea-pig sensitization test and two genotoxicity tests: the Salmonella reverse mutation test and the chromosomal aberration test. The NiTi alloy showed no cytotoxic, allergic or genotoxic activity, similar to the clinical reference control material AISI 316 LVM stainless steel. This promising biological behaviour was most likely due to a minimal release of ions and in that way a reflection of the good corrosion resistance of the NiTi alloy. Given these very good results, together with the good tissue compatibility as shown in several implantation studies in the literature, the NiTi alloy can be regarded as a biologically safe implant material with many promising clinical applications.

engineering, biomedical,materials science, biomaterials
Biomedical Porous Shape Memory Alloys for Hard-Tissue Replacement Materials

Bin Yuan,Min Zhu,Chi Yuen Chung

DOI: https://doi.org/10.3390/ma11091716

IF: 3.4

2018-09-13

Materials

Abstract:Porous shape memory alloys (SMAs), including NiTi and Ni-free Ti-based alloys, are unusual materials for hard-tissue replacements because of their unique superelasticity (SE), good biocompatibility, and low elastic modulus. However, the Ni ion releasing for porous NiTi SMAs in physiological conditions and relatively low SE for porous Ni-free SMAs have delayed their clinic applications as implantable materials. The present article reviews recent research progresses on porous NiTi and Ni-free SMAs for hard-tissue replacements, focusing on two specific topics: (i) synthesis of porous SMAs with optimal porous structure, microstructure, mechanical, and biological properties; and, (ii) surface modifications that are designed to create bio-inert or bio-active surfaces with low Ni releasing and high biocompatibility for porous NiTi SMAs. With the advances of preparation technique, the porous SMAs can be tailored to satisfied porous structure with porosity ranging from 30% to 85% and different pore sizes. In addition, they can exhibit an elastic modulus of 0.4–15 GPa and SE of more than 2.5%, as well as good cell and tissue biocompatibility. As a result, porous SMAs had already been used in maxillofacial repairing, teeth root replacement, and cervical and lumbar vertebral implantation. Based on current research progresses, possible future directions are discussed for “property-pore structure” relationship and surface modification investigations, which could lead to optimized porous biomedical SMAs. We believe that porous SMAs with optimal porous structure and a bioactive surface layer are the most competitive candidate for short-term and long-term hard-tissue replacement materials.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Enhanced in vitro immersion behavior and antibacterial activity of NiTi orthopedic biomaterial by HAp-Nb2O5 composite deposits

Mir Saman Safavi,Jafar Khalil-Allafi,Elisa Restivo,Arash Ghalandarzadeh,Milad Hosseini,Giacomo Dacarro,Lorenzo Malavasi,Antonella Milella,Andrea Listorti,Livia Visai

DOI: https://doi.org/10.1038/s41598-023-43393-3

2023-09-25

Abstract:NiTi is a class of metallic biomaterials, benefit from superelastic behavior, high biocompatibility, and favorable mechanical properties close to that of bone. However, the Ni ion leaching, poor bioactivity, and antibacterial activity limit its clinical applications. In this study, HAp-Nb2O5 composite layers were PC electrodeposited from aqueous electrolytes containing different concentrations of the Nb2O5 particles, i.e., 0-1 g/L, to evaluate the influence of the applied surface engineering strategy on in vitro immersion behavior, Ni2+ ion leaching level, and antibacterial activity of the bare NiTi. Surface characteristics of the electrodeposited layers were analyzed using SEM, TEM, XPS, and AFM. The immersion behavior of the samples was comprehensively investigated through SBF and long-term PBS soaking. Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) infective reference bacteria were employed to address the antibacterial activity of the samples. The results illustrated that the included particles led to more compact and smoother layers. Unlike bare NiTi, composite layers stimulated apatite formation upon immersion in both SBF and PBS media. The concentration of the released Ni2+ ion from the composite layer, containing 0.50 g/L Nb2O5 was ≈ 60% less than that of bare NiTi within 30 days of immersion in the corrosive PBS solution. The Nb2O5-reinforced layers exhibited high anti-adhesive activity against both types of pathogenic bacteria. The hybrid metallic-ceramic system comprising HAp-Nb2O5-coated NiTi offers the prospect of a potential solution for clinical challenges facing the orthopedic application of NiTi.
Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment

Narges Shayesteh Moghaddam,Soheil Saedi,Amirhesam Amerinatanzi,Alejandro Hinojos,Ali Ramazani,Julia Kundin,Michael J. Mills,Haluk Karaca,Mohammad Elahinia

DOI: https://doi.org/10.1038/s41598-018-36641-4

IF: 4.6

2019-01-10

Scientific Reports

Abstract:Shape memory alloys (SMAs), such as Nitinol (i.e., NiTi), are of great importance in biomedical and engineering applications due to their unique superelasticity and shape memory properties. In recent years, additive manufacturing (AM) processes have been used to produce complex NiTi components, which provide the ability to tailor microstructure and thus the critical properties of the alloys, such as the superelastic behavior and transformation temperatures (TTs), by selection of processing parameters. In biomedical applications, superelasticity in implants play a critical role since it gives the implants bone-like behavior. In this study, a methodology of improving superelasticity in Ni-rich NiTi components without the need for any kind of post-process heat treatments will be revealed. It will be shown that superelasticity with 5.62% strain recovery and 98% recovery ratio can be observed in Ni-rich NiTi after the sample is processed with 250 W laser power, 1250 mm/s scanning speed, and 80 µm hatch spacing without, any post-process heat treatments. This superelasticity in as-fabricated Ni-rich SLM NiTi was not previously possible in the absence of post-process heat treatments. The findings of this study promise the fast, reliable and inexpensive fabrication of complex shaped superelastic NiTi components for many envisioned applications such as patient-specific biomedical implants.

multidisciplinary sciences

Prevalence of peripheral and autonomic neuropathy in newly diagnosed type II (noninsulin-dependent) diabetes.

Applications of Nickel-Titanium Alloy

Post-Processing of NiTi Alloys: Issues and Challenges

A review on surface modification of NiTinol for biomedical applications

TEM study of the Ni-Ti shape memory micro-wire

Crustacean Immunity

SLM Additive Manufacturing of NiTi Porous Implants: A Review of Constitutive Models, Finite Element Simulations, Manufacturing, Heat Treatment, Mechanical, and Biomedical Studies

In vitro evaluation of the biocompatibility and bioactivity of a SLM-fabricated NiTi alloy with superior tensile property

A Review on Design and Mechanical Properties of Additively Manufactured NiTi Implants for Orthopedic Applications

Experimental Investigation of the Biofunctional Properties of Nickel-Titanium Alloys Depending on the Type of Production

High-dose ifosfamide by infusion with mesna in advanced soft tissue sarcoma.

A review of NiTi shape memory alloy as a smart material produced by additive manufacturing

Prospects of Production and Application of Hybrid Structures and Composites Made of Titanium Alloys and Nitinol: Overview

An Efficient Approach for Nitrogen Diffusion and Surface Nitriding of Boron-Titanium Modified Stainless Steel Alloy for Biomedical Applications

In vitro and in vivo characterization of novel plasma treated nickel titanium shape memory alloy for orthopedic implantation

Evidence for functional ryanodine receptors in Schistosoma mansoni and their putative role in the control of calcium homeostasis.

Surface Characteristics, Biocompatibility, And Mechanical Properties Of Nickel-Titanium Plasma-Implanted With Nitrogen At Different Implantation Voltages

Cytotoxic, allergic and genotoxic activity of a nickel-titanium alloy

Biomedical Porous Shape Memory Alloys for Hard-Tissue Replacement Materials

Enhanced in vitro immersion behavior and antibacterial activity of NiTi orthopedic biomaterial by HAp-Nb2O5 composite deposits

Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment