Abstract:The use of micro selective laser melting (μ-SLM) enables product miniaturization, which is one of the megatrends in the metal processing industry and increasingly find its applications in biomedical and electronics industries. Among these, NiTi shape memory alloy (SMA) shows a great promise in functional micro-scaled components such as stent. There are inevitably some imperfections in SLM, but the imperfection formation in μ-SLM may not be the same as that in the conventional SLM. This work studies the imperfections in μ-SLM produced NiTi samples, with focus on defects, microstructure and thermal/mechanical behaviors. The effects of substrate material, laser-related process parameter and scanning strategy on defects such as porosity and cracks were analyzed, and a process window for "Scanning speed – Hatch spacing" was determined. Transformation peak was hardly detected in thermal behavior of as-printed and post heat-treated μ-SLM NiTi, resulting from microstructure inhomogeneity, Ti-rich impurity phases TiC1−xNx/Ti4Ni2Ox and precipitate Ti2Ni, which were introduced by powder preparation, μ-SLM or post heat treatment. The as-printed NiTi shows higher compressive strength and fracture strain than the post heat-treated samples, reaching 2796.57 MPa and 27.80% on average, respectively, but the plateau stress-strain stage is indistinguishable due to inhomogeneous and localized stress-induced martensite transformation. The brittle Ti2Ni phase was introduced in post heat treatment, leading to inhomogeneous microstructure and lower ductility. The underlying mechanisms revealed in these imperfections could serve as a guideline for defect control, process optimization, as well as post heat treatment methods for μ-SLM of NiTi alloy.

SLM Additive Manufacturing of NiTi Porous Implants: A Review of Constitutive Models, Finite Element Simulations, Manufacturing, Heat Treatment, Mechanical, and Biomedical Studies

A Review on Design and Mechanical Properties of Additively Manufactured NiTi Implants for Orthopedic Applications

Additive Manufacturing of NiTi Shape Memory Alloy for Biomedical Applications: Review of the LPBF Process Ecosystem

Nickel-titanium shape memory alloys made by selective laser melting: a review on process optimisation

The fabrication of NiTi shape memory alloy by selective laser melting: a review

Additive Manufacturing: An Opportunity for the Fabrication of Near-Net-Shape NiTi Implants

Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment

In vitro evaluation of the biocompatibility and bioactivity of a SLM-fabricated NiTi alloy with superior tensile property

A Review of Selective Laser Melted NiTi Shape Memory Alloy

Advances in Selective Laser Melting of Nitinol Shape Memory Alloy Part Production

Research and Development in NiTi Shape Memory Alloys Fabricated by Selective Laser Melting

Research Status and Prospect of Additive Manufactured Nickel-Titanium Shape Memory Alloys

Biomedical Porous Shape Memory Alloys for Hard-Tissue Replacement Materials

Fabrication And Surface Modification Of Porous Nickel-Titanium Shape Memory Alloy For Bone Grafts

Mechanical Evaluation of Selective Laser Melted Ni-Rich NiTi: Compression, Tension, and Torsion

Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: A review

Finite Element Simulation and Additive Manufacturing of Stiffness-Matched NiTi Fixation Hardware for Mandibular Reconstruction Surgery

Fabrication and Properties of Porous NiTi Shape Memory Alloys for Heavy Load-Bearing Medical Applications

Nitinol: From historical milestones to functional properties and biomedical applications

Micro selective laser melting of NiTi shape memory alloy: Defects, microstructures and thermal/mechanical properties