Abstract:Nickel-titanium alloys used in dentistry have a variety of mechanical, chemical, and biofunctional properties that are dependent on the manufacturing process. The aim of this study was to compare the mechanical and biofunctional performances of a nickel-titanium alloy produced by the continuous casting method (NiTi-2) with commercial nitinol (NiTi-1) manufactured by the classical process, i.e., from remelting in a vacuum furnace with electro-resistive heating and final casting into ingots. The chemical composition of the tested samples was analyzed using an energy dispersive X-ray analysis (EDX) and X-ray fluorescence (XRF). Electron backscatter diffraction (EBSD) quantitative microstructural analysis was performed to determine phase distribution in the samples. As part of the mechanical properties, the hardness on the surface of samples was measured with the static Vickers method. The release of metal ions (Ni, Ti) in artificial saliva (pH 6.5) and lactic acid (pH 2.3) was measured using a static immersion test. Finally, the resulting corrosion layer was revealed by means of a scanning electron microscope (SEM), which allows the detection and direct measurement of the formatted oxide layer thickness. To assess the biocompatibility of the tested nickel-titanium alloy samples, an MTT test of fibroblast cellular proliferation on direct contact with the samples was performed. The obtained data were analyzed with the IBM SPSS Statistics v22 software. EDX and XRF analyses showed a higher presence of Ni in the NiTi-2 sample. The EBSD analysis detected an additional NiTi2-cubic phase in the NiTi-2 microstructure. Additionally, in the NiTi-2 higher hardness was measured. An immersion test performed in artificial saliva after 7 days did not induce significant ion release in either group of samples (NiTi-1 and NiTi-2). The acidic environment significantly increased the release of toxic ions in both types of samples. However, Ni ion release was two times lower, and Ti ion release was three times lower from NiTi-2 than from NiTi-1. Comparison of the cells' mitochondrial activity between the NiTi-1 and NiTi-2 groups did not show a statistically significant difference. In conclusion, we obtained an alloy of small diameter with an appropriate microstructure and better response compared to classic NiTi material. Thus, it appears from the present study that the continuous cast technology offers new possibilities for the production of NiTi material for usage in dentistry.

Applications of Nickel-Titanium Alloy

Nitinol: From historical milestones to functional properties and biomedical applications

Post-Processing of NiTi Alloys: Issues and Challenges

TEM study of the Ni-Ti shape memory micro-wire

Prospects of Production and Application of Hybrid Structures and Composites Made of Titanium Alloys and Nitinol: Overview

Development and Applications of Nickel-Titanium Alloys with Shape Memory Effect and Superelasticity

Cytotoxic, allergic and genotoxic activity of a nickel-titanium alloy

A review on surface modification of NiTinol for biomedical applications

Surface Characteristics, Biocompatibility, And Mechanical Properties Of Nickel-Titanium Plasma-Implanted With Nitrogen At Different Implantation Voltages

Electrochemical and surface characterization of a nickel–titanium alloy

In vitro and in vivo characterization of novel plasma treated nickel titanium shape memory alloy for orthopedic implantation

A review of NiTi shape memory alloy as a smart material produced by additive manufacturing

The influence of surface oxides on the distribution and release of nickel from Nitinol wires

Experimental Investigation of the Biofunctional Properties of Nickel-Titanium Alloys Depending on the Type of Production

Superelastic and Thermally Activated TiNi Alloys and their Applications in Dentistry

Biocompatible antibiotic-coupled nickel-titanium nanoparticles as a potential coating material for biomedical devices

Investigation of sliding wear, electrochemical corrosion, and biocompatibility of Ti-Nb alloys for biomedical applications

Advances in Selective Laser Melting of Nitinol Shape Memory Alloy Part Production

Application Research of Porous Ti-Ni Shape Memory Alloys in the Fields of Medicine and Shakeproof

A Critical Review on Nickel–Titanium Thin-Film Shape Memory Alloy Fabricated by Magnetron Sputtering and Influence of Process Parameters

Improved Tribological Performance of Nitride-Reinforced Biocompatible Titanium–Niobium–Zirconium–Tantalum (TNZT) Alloys for Advanced Orthopedic Applications